Mechanical and Tribological Performance of Luffa cylindrica Fibre-Reinforced Epoxy Composite

Niharika Mohanta, Samir Kumar Acharya

Abstract


This work focuses on the mechanical properties and solid particle impact behaviour of Luffa cylindrica fibre (LCF)-reinforced epoxy composites. Single (SL)-, double (DL)-, and triple (TL)-layered composites were prepared using the general hand lay-up technique. The erosive wear test was carried out using an air jet erosion tester according to the ASTM G76 standard. The erodent used was silica sand particles (200 ± 50 µm). The experimental parameters studied for the erosion rate of the LCF epoxy composites were impingement angle (30° to 90°) and particle velocity (48 m/s to 82 m/s). Analysis of the results revealed that at the peak erosion rate, semi ductile behaviour of the composite was apparent. Possible erosion mechanisms were discussed and were investigated using scanning electron microscopy (SEM).

Keywords


Luffa cylindrica fibre (LCF); Mechanical properties; Erosive wear; Erodent; Semi-ductile; SEM

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126