Improving Adsorption Deinking by Identifying the Optimum Balance between Polymer Beads and Deinking Chemistry

Krithika Ravi, Thomas Schrinner, Harald Grossmann, Amiyakumar Ray, Rita Tandon

Abstract


Ink removal from recovered paper is a very important process in paper and board recycling. The current deinking processes have made obvious contributions to the use of raw materials for the paper and board industries. In contrast to the flotation deinking process, in which small air bubbles are used to remove ink from the pulp, the novel and more energy-efficient method of adsorption deinking technique depends on the attachment and adsorption of ink particles on small polymer beads. The energy savings of adsorption deinking results from the fact that the process is efficient at greater stock consistencies, thus providing water conservation and savings. The present study was carried out to improve the adsorption deinking method by identifying the optimum balance between the deinking chemistry and the polymer beads. Different types of deinking solutions and polymer beads were used for this study with newsprints and mixture of newsprints and magazines. It was found that EGA 3000 solution and polyethylene terephthalate beads worked well with newspaper pulp.

Keywords


Adsorption deinking; Calcium ions; Chemical recipes; Polymer beads

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126