Synthesis and Characterization of Sucrose-Melamine-Formaldehyde Adhesives

Weixing Gan, Haibing Yang, Yifu Zhang, Sheldon Q. Shi, Cuiwu Lin, Licheng Pan, Zhoufeng Huang

Abstract


The objective of this project was to use sucrose as a partial substitute for melamine in the synthesis of sucrose–melamine-formaldehyde (SMF) resin. The SMF was synthesized in a base condition. The wet bonding strength, shelf life, and formaldehyde emission of the SMF resin were determined. Fourier transform infrared spectroscopy (FT-IR) and mass spectroscopy (MS) were employed to analyze the chemical structure of the SMF resin. The shelf life of SMF resin increased as the sucrose content increased. Also as the sucrose content increased, the wet bonding strength decreased and the formaldehyde emissions decreased. The FT-IR and MS spectra revealed the structures of sucrose, melamine, and formaldehyde in the SMF, and chemical reactions of SMF resins occurred between the three primary hydroxyl groups of sucrose and methylolmelamine. Based on the results of this study, a sucrose to melamine mole ratio of 0.4:1 was determined to be the optimal ratio for the SMF resin.

Keywords


Sucrose-melamine-formaldehyde (SMF) Adhesive; Synthesis; Characterization

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126