Layer-by-layer Deposition of TiO2 Nanoparticles in the Wood Surface and its Superhydrophobic Performance

Xi Lu, Yingcheng Hu

Abstract


A hydrophilic wood surface was transformed to become superhydrophobic by layer-by-layer (LbL) assembly of polyelectrolyte/titanium dioxide (TiO2) nanoparticles multilayers and subsequent hydrophobic modification with 1H, 1H, 2H, 2H-perfluoroalkyltriethoxysilane (POTS). The chemical composition of the wood samples before and after treatment was characterized by energy dispersive X-ray analysis (EDXA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). These analyses showed that a high-surface-roughness film of TiO2 nanoparticles deposited by LbL became combined on the wood surface with a low-surface-energy thin layer of POTS. The microstructure and the hydrophobicity of the wood samples were analyzed by scanning electron microscope (SEM) and contact angle measurements, respectively. The morphology and the values of water contact angle (WCA) demonstrated that the reaction pH and number of self-assembled layers were the main factors affecting hydrophobic wood samples. After assembly with 5 or more multilayers, the wood surface exhibited excellent superhydrophobicity with the highest WCA of 161°.

Keywords


Superhydrophobic; Wood surface; Layer-by-layer assembly; TiO2 nanoparticles

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126