Contributions of Basic Chemical Components to the Mechanical Behavior of Wood Fiber Cell Walls as Evaluated by Nanoindentation

Xinzhou Wang, Yanjun Li, Yuhe Deng, Wangwang Yu, Xuqin Xie, Siqun Wang

Abstract


Selective chemical extraction was applied to gradually remove classes of chemical components from wood cell walls. Nanoindentation was performed on the control and treated wood cell walls to evaluate the contributions of the chemical components to the cell walls by measuring the elastic modulus, hardness, and creep compliance. Burger’s model was applied to simulate the process of nanoindentation and to gain insight into the response of visco-elastic properties to the chemical components. Wood extractives showed limited effects on the cell-wall mechanics; however, the removal of hemicelluloses and lignin resulted in reductions of 11.7% and 28.4%, respectively, in the elastic modulus and 14.8% and 30.4%, respectively, in the hardness. The extraction of hemicelluloses and lignin reduced the resistance of wood cell walls to creep. Furthermore, the extracted parameters from Burger’s modeling indicated that cellulose exhibited the greatest influence on the mechanical properties of wood cell wall, while hemicelluloses exhibited the greatest contribution to cell-wall viscosity, and lignin contributed extensively to cell-wall elasticity.

Keywords


Cell wall; Chemical component; Mechanical behavior; Nanoindentation

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126