Comparison of the Thermal Degradation Properties of Crystalline and Amorphous Cellulose, as well as Treated Lignocellulosic Biomass

Akihiro Hideno

Abstract


Thermo-gravimetric analyses of three cellulosic substances, namely, microcrystalline and amorphous cellulose, and treated Japanese cypress (JC) sawdust were carried out in this study. The thermal degradation temperature of crystalline cellulose decreased with increasing ball-milling time, while that of amorphous cellulose barely changed. However, small differences in the derivative thermo-gravimetric (DTG) curves between crystalline cellulose (i.e., before ball milling) and amorphous cellulose (i.e., after ball milling) were observed. The DTG curves of high-crystalline cellulose were sharp and similar to those of low-crystalline samples. The thermal degradation temperature of JC was decreased by ball milling, and its DTG peak shape became broad and low. These effects could be caused by the denaturing of non-cellulosic substances such as hemicellulose and lignin. The thermal degradation behaviors revealed by the DTG curves may serve as indicators of crystalline cellulose purity and other physical properties of lignocellulosic biomass.

Keywords


Thermal gravimetric analysis; Cellulose; Lignocellulose; Crystallinity; Ball milling

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126