Chemical Modification of Palm Kernel Shell Filled Polylactic Acid Biocomposite Films

Mohd AkmalHakim Dato' Hasnan, Salmah Husseinsyah, Lim Bee Ying, Mohd Faizal Abd Rahman

Abstract


Palm kernel shell (PKS) was incorporated with polylactic acid (PLA) using a solution casting method to produce PLA/PKS biocomposite films. The effects of filler content and butyl methacrylate on the mechanical properties, morphological properties, and thermal properties of PLA/PKS biocomposite films were studied. The addition of PKS into the PLA matrix decreased the tensile strength and elongation at break of PLA/PKS biocomposite films with increasing filler content. In contrast, the modulus of elasticity of the biocomposite films increased. The use of butyl methacrylate as a chemical modification for PKS enhanced the interfacial adhesion and wettability of PKS inside the PLA matrix. This effect was confirmed by the increase in tensile strength, modulus of elasticity, and thermal stability of the biocomposite films. Moreover, scanning electron microscopy showed that there was better interfacial interaction between the filler and the PLA matrix.

Keywords


Polylactic acid; Palm kernel shell; Butyl methacrylate; Biocomposite films

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126