Lignin Phenol Formaldehyde Resoles: The Impact of Lignin Type on Adhesive Properties

Masoumeh Ghorbani, Falk Liebner, Hendrikus W. G. van Herwijnen, Lorenz Pfungen, Maria Krahofer, Enkhjargal Budjav, Johannes Konnerth

Abstract


Lignin-phenol-formaldehyde (LPF) resoles were prepared using different types of lignin at various levels of phenol replacement by lignin (0 to 40 wt.%). Adhesive properties including thermal behavior as determined by differential scanning calorimetry (DSC), time-dependent development of bond strength during hot pressing as determined by automated bonding evaluation system (ABES), tensile shear strength of solid beech wood lap-joints, and free formaldehyde content of the adhesives were investigated. Preparation of phenol-formaldehyde (PF) resole was accomplished using molar ratios of formaldehyde/phenol and NaOH/phenol of 2.5 and 0.3, respectively. Four different types of technical lignins were studied: Sarkanda grass soda lignin, wheat straw soda lignin, pine kraft lignin, and beech organosolv lignin. The synthesis of the resoles was optimized for 20 and 40 wt.% phenol replacement by lignin. Increasing substitution of phenol resulted in faster gain of LPF viscosity for all studied lignins. The best curing performances of the LPF resoles were observed for pine kraft lignin at both 20 and 40% phenol replacement. The amount of formaldehyde not consumed during cooking increased with increasing level of phenol replacement. However, no differences in free formaldehyde content were observed between the different lignin samples at comparable levels of phenol replacement.

Keywords


Phenol-formaldehyde adhesive; Lignin-phenol-formaldehyde adhesive; Lignin; ABES; DSC

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126