Bonding Strength of Some Adhesives in Heat-Treated Hornbeam (Carpinus betulus L.) Wood Used for Interior and Exterior Decoration

Oğuzhan Uzun, Osman Perçin, Mustafa Altınok, İhsan Kureli

Abstract


Heat-treated wood has an ever-expanding market for exterior and interior applications. The objective of this study was to determine the effect of a heat treatment on the bonding strength of hornbeam (Carpinus betulus L.) wood that was bonded with melamine formaldehyde (MF), polyurethane (PUR), and polyvinyl acetate (PVAc-D4) adhesives. Hornbeam lamellas were heat treated at 150 °C, 175 °C, 200 °C, and 225 °C for 3 h and then bonded. The bonding strength of the specimens was determined. In addition, the density, weight loss, and pH value of the heat-treated wood were investigated. The results showed that the bonding strengths of the heat-treated wood specimens decreased with the temperature of the heat treatment. The bonding strength of the PUR adhesive was higher than the MF and the PVAc-D4.

Keywords


Heat treatment; Glue; Bonding strength; Hornbeam (Carpinus betulus L.)

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126