The Influence of Different Types of Bisulfite Cooking Liquors on Pine Wood Components

Raghu Deshpande, Lars Sundvall, Hans Grundberg, Ulf Germgard

Abstract


In this laboratory study, the initial phase of a single-stage sodium bisulfite cook was observed and analyzed. The experiments were carried out using either a lab- or a mill-prepared cooking acid, and the cooking temperature used in these experiments was 154 °C. Investigated parameters were the chemical consumption, the pH profile, and the pulp yield with respect to cellulose, lignin, glucomannan, xylan, and finally extractives. Cooking was extended down to approximately 60% pulp yield and the pulp composition during the cook, with respect to carbohydrates and lignin, was summarized in a kinetic model. The mill-prepared cooking acid had a higher COD (Chemical Oxygen Demand) and TOC (Total Organic Carbon) content than the lab-prepared cooking acid and this influenced the pH and the formation of thiosulfate during the cook. It was found that the presence of dissolved carbohydrates and lignin in the bisulfite cooking liquor affected the extractives removal and the thiosulfate formation.

Keywords


Bisulfite pulping; Cellulose; Extractives; Glucomannan; Kinetics; Lignin; Pine; Sulfate; Thiosulfate; Xylan

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126