A Two-Step Conversion of Corn Stover into Furfural and Levulinic Acid in a Water/Gamma-Valerolactone System

Minghao Li, Wenzhi Li, Qiyu Liu, Hasan Jameel, Hou-min Chang, Shengxin An, Longlong Ma

Abstract


A two-step hydrolysis method was evaluated as a potential means of obtaining high yields of furfural and levulinic acid from corn stover using sulfuric acid as catalyst in a water/gamma-valerolactone (GVL) system. The corn stover underwent a high-temperature hydrolysis process to produce levulinic acid, followed by a low-temperature hydrolysis process to produce furfural. A series of experiments were conducted to explore the relationship between the different reaction parameters and the final yields of furfural and levulinic acid. Scanning electron microscopy (SEM) pictures together with X-ray diffraction (XRD) analysis were used to further elaborate on the hydrolysis results. Molar yields of about 70.65% furfural and 57.7% levulinic acid were obtained by applying this method with a low temperature of 140 °C and a high temperature of 190 °C, together with 0.2 M of sulfuric acid used as the catalyst. These results indicated that this was an effective way to obtain satisfactory yields of furfural and levulinic acid from corn stover.

Keywords


Two-step conversion; Corn stover; Furfural; Levulinic acid; γ-Valerolactone

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126