Dynamic Modulus of Wood Containing Water-Resistant Glue Finger Joint after Severe Steaming

Shamin Shamaiirani, Mehran Roohnia

Abstract


The effect of steaming treatment on the dynamic modulus of oak wood (Quercus castaneifolia, C. A. Mey.; Fagaceae) containing a water resistant glue-finger joint was investigated. Sample joints were made with two different types of waterproof adhesives, polyurethane (PU) and epoxy, and the samples were tested by a free flexural vibration method according to flexural and longitudinal free vibration modes. Compared with the epoxy joints, the PU finger-joints retained elastic moduli closer to their initial values. In all three vibration tests, finger-jointed oak wood specimens with either glue retained their moduli of elasticity, after the steaming treatments. In the case of longitudinal-tangential (LT) vibration, some increases were observed for the evaluated elastic moduli. After steaming, the obtained dynamic values decreased. For epoxy-bonded specimens, the correlation coefficient in terms of the elastic modulus before and after steaming were weak. There were some acceptable PU-bonded specimens, but there was a considerable decrease after steaming.

Keywords


Elastic modulus; Finger joint; Polyurethane; Epoxy; Vibration; Flexural; Stress wave

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126