Development of a One-Step Process for Production of Foam Core Particleboards using Rigid Polyurethane Foam

Ali Shalbafan, Kamran Choupani Chaydarreh, Johannes Welling

Abstract


A simulated one-step process has been developed for the production of foam core particleboards using rigid polyurethane as the core layer. The results showed that the different techniques used for surface layer separation (unresinated particles and sprayed water) and foam injections (open system and closed system) had no influences on panels’ characteristics. Mechanical properties (e.g., bending strength and internal bond strength) were mostly influenced by the surface layer thickness, while the water absorption and edge screw withdrawal were influenced by the foam cell structure. The use of sprayed water for surface layer separation doubled the formaldehyde emission (FE) of the panels. The addition of urea (based on 10% of the dry resin) to the sprayed water had a positive effect of reducing the final FE. Furthermore, increasing the surface layer thickness had a positive, linear relationship with FE.

Keywords


Foam core particleboards; Lightweight; Sandwich; Polyurethane; Rigid foam

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126