Direct Liquefaction of Bamboo in Ethanol-Phenol Co- Solvent

Yan Ma, Jianchun Jiang, Weihong Tan, Kui Wang, Hao Ying, Junming Xu

Abstract


Bamboo was converted into bio-oil via direct liquefaction with ethanol-phenol as solvent in a 250 mL Parr High-Pressure reactor. The influences of reaction parameters such as reaction time, liquefaction temperature, catalyst content, ratio of solvent/bamboo, and phenol concentration on the liquefaction yield were investigated. The highest liquefaction yield was 98.5 wt.% under the optimal conditions. The elemental analysis of the produced bio-oil revealed that the oil product had a higher heating value (HHV) of 29.5 MJ/kg, which was much higher than that of the raw material (16.4 MJ/kg). Gas chromatography mass spectrometry (GC-MS) and Fourier transform infrared spectrometry (FT-IR) measurements showed that the main volatile compounds in the crude bio-oil were phenolics and esters.

Keywords


Liquefaction; Bamboo; Bio-oil; Ethanol-phenol; Co-solvent

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126