The Combustion Characteristics of Self-igniting Briquettes Prepared with Torrefied Wood Powder from a Wood-Roasting Method

Chang-goo Lee, Chul Choi, Ji-chang Yoo, Hee-jin Kim, Seung-min Yang, Seog-goo Kang

Abstract


Agglomerated torrefied wood fuel was tested for its fuel properties and combustion characteristics. Torrefied wood was produced in a wood roaster, with three species (Pinus densiflora Siebold & Zucc., Quercus serrata Thumb. Ex Murray, Sinoarundinaria nigra var. henonis honda) that were torrefied at 220 °C for 180 s. After being torrefied, these powders were used as agglomerated torrefied wood-powder. Gelatin was used as binder, and linseed oil was spread on one side of each sample. All test samples were ignited and tested for carbon monoxide release and temperature variation. The agglomerated torrefied wood fuel showed 82% less carbon monoxide release in comparison to self-igniting briquettes. In particular, pine showed less CO release and mass loss. Also, pine and bamboo showed higher heat efficiency than the ignition coal. Therefore, using torrefied wood for agglomerated fuel reduced the carbon monoxide release and improved the heating efficiency of the ignition coal.

Keywords


Torrefaction; Carbon monoxide; Mass loss rate; Heat efficiency

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126