Research on the Thermo-Physical Properties of Corncob Residues as Gasification Feedstock and Assessment for Characterization of Corncob Ash from Gasification

Xiwen Yao, Kaili Xu, Yu Liang


Harnessing energy from biomass is environmentally friendly because of the essentially zero net CO2 impact. As a common agricultural byproduct, corncobs are abundant in quantity. This study was carried out to examine the thermo-physical properties of corncobs and characterize the properties of corncob ash produced from gasification, in order to provide a basis for transforming it into value-added products. The results showed that the pyrolysis of corncobs followed a three-step, stepwise mechanism. Activation energies calculated by the Coats-Redfern method at heating rates of 5, 10, and 20 °C/min were 79.08, 76.73, and 75.78 kJ·mol-1, respectively, implying that the corncobs could be decomposed easily at high heating rates. The emissions of CO, CO2, CH4, H2, H2O, and O2 during pyrolysis corresponded well with thermal curves. Corncob ash could be a good fertilizer because of its high contents of K, P, and Ca. The high SiO2 content makes the corncob ash suitable for ceramics and blended cement concrete. Sylvite (KCl) and quartz (SiO2) were the two major crystal phases in the corncob ash. Relatively large particles of unburnt carbon residues in the ash indicated that low-cost adsorbent could be developed from these carbon residues.


Pyrolysis; Gasification; Corncob; Kinetics; Corncob ash; Ash characterization

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022,; Lucian A. Lucia, (919) 515-7707, URLs:; ISSN: 1930-2126