Impact Bending Strength as a Function of Selected Factors

Milan Gaff, Daniel Ruman, Vladimír Záborský, Vlastimil Borůvka

Abstract


This article examines the influence of selected factors (wood species, densification, thickness, glue type, and number of cycles) on the impact bending strength (IBS) of solid and laminated wood. The evaluated properties were measured on samples of European beech (Fagus sylvatica L.) and common aspen (Populus tremula L.). Two types of glues were used for laminated wood: polyvinyl acetate (PVAc) and polyurethane (PUR). The highest IBS values were recorded in laminated beech specimens glued with polyvinyl acetate glue that were not subjected to cyclical loading.

Keywords


Impact bending strength; Cyclic loading; Laminated wood; Densification

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126