Mechanical Properties of Phenol Formaldehyde Hybrid Composites Reinforced with Natural Cellulose Fibers

Ayyanar Athijayamani, M. Chrispin Das, S. Sekar, Kalimuthu Ramanathan

Abstract


This paper reports on the preparation and mechanical properties of hybrid polymer composites involving areca fine fibers (AFFs), sisal fibers (SFs), and roselle fibers (RFs) as reinforcing agents in a phenol formaldehyde (PF) resin-based polymer matrix. For comparative study, an AFF/glass fiber-reinforced PF hybrid composite and AFF/PF composite were also prepared. Hybrid composites were fabricated using a hand lay-up technique, where the weight fraction of fibers was kept at 40 wt% at a ratio of 1:1. Tensile and flexural properties of randomly oriented intimately mixed hybrid polymer composites were evaluated. The results revealed that the mechanical properties of the AFF/PF composite increased by a considerable amount when hybridized with the sisal fibers. Scanning electron microscopy (SEM) was used to analyze the fractured surface of the composite specimens after mechanical testing.

Keywords


Natural cellulose fibers; Hybrid composites; Mechanical properties; SEM

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126