Optimizing Refining Conditions of Pinus massoniana Cellulose Fibers for Improving the Mechanical Properties of Ultra-Low Density Plant Fiber Composite (ULD_PFC)

Tingjie Chen, Zhenzeng Wu, Wei Wei, Yongqun Xie, Qihua Wei, Xiaodong (Alice) Wang, Olle Hagman, Olov Karlsson

Abstract


Response surface methodology was used to optimize the refining conditions of Pinus massoniana cellulose fiber and to improve the mechanical properties of ultra-low density plant fiber composite (ULD_PFC). The effects and interactions of the pulp consistency (X1), the number of passes (X2), and the beating gap (X3) on the internal bond strength of ULD_PFC were investigated. The results showed that the optimum internal bond strength (91.72 ± 2.28 kPa) was obtained under the conditions of 8.0% pulp consistency, two passes through the refiner, and a 30.0 μm beating gap. Analysis of the physical properties of the fibers and handsheets showed that the fibrillation of fibers with optimum refining conditions was improved. Also, the tear index of the optimal specimen was 13.9% and 24.5% higher than specimen-1 with a lowest beating degree of 24 oSR and specimen-6 with a highest beating degree of 73 oSR, respectively. Consequently, the optimal refining conditions of the fibers are valid for preparing ULD_PFCs.

Keywords


Refining; Physical properties; Handsheet; Internal bond strength; Optimization

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126