Analysis of Dominant Process Parameters in Deep-Drawing of Paperboard

Tobias Müller, Alexander Lenske, Marek Hauptmann, Jens-Peter Majschak

Abstract


The application of the wrinkle measuring method described in Müller et al. (2017) and the subsequent evaluation algorithm of a range of deep-drawn samples were used to determine the influences and interdependencies of blankholder force, tool temperatures, and drawing height on the formation of wrinkles in paperboard. The main influences were identified and quantitatively evaluated. For the given experimental space, a regression function was derived and validated in further experiments. It was shown that a quadratic regression was superior to the previously used linear regression. The findings were discussed and compared with the results of similar experiments from past publications. Special attention was given to the wrinkles formed and the resulting quality of the formed paperboard cups. The restrictions of the data acquisition from the measuring method that was used and limitations of the model were presented to demonstrate the reliability of the results.

Keywords


Paperboard; Deep-drawing; Forming; Process analysis; Quality assessment; Wrinkle distribution

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126