Comparison of the Radon Absorption Capacity of Carbonized Boards from Different Wood-based Panels

Min Lee, Jaehyuk Jang, Sangmin Lee, Sangbum Park

Abstract


The radon absorption performance was determined and compared for different types of carbonized boards to establish effective carbonized boards. Moreover, the absorption mechanism of carbonized boards was investigated by specific surface area and pore size in each of the carbonized boards. The radon absorption performance was ranked in the following order: ash (87%), medium-density fiberboard (MDF, 83%), oriented strand board (OSB, 82%), particleboard (PB, 77%), and plywood (PW, 67%). The correlation between radon absorption capacity and surface area or pore volume showed that a higher surface area or pore volume had higher radon absorption performance. However, the highest surface area and pore volume was detected on carbonized MDF, which had a radon absorption performance that was 5% less than carbonized ash board. Therefore, the surface area and pore volume as well as other factors affected the absorption performance.

Keywords


Carbonized board; Wood-based panel; Carbonization; Radon absorption; Surface area

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126