Thermal Conductivity Values for Laminated Strand Lumber and Spruce for Use in Hybrid Cross-laminated Timber Panels

Jaya Tripathi, Robert William Rice

Abstract


This study examined the thermal conductivity as a function of specific gravity and moisture content for laminated strand lumber (LSL) and red spruce. As part of a larger study of heat and mass transfer in cross-laminated timber panels using laminate comprised of both LSL and spruce, the authors measured the thermal conductivity at four moisture content levels. The results showed that the LSL had a higher thermal conductivity value across the entire moisture content range tested. The average difference was just over 8% and the range for both LSL and spruce was from 0.081 W /m-K to 0.126 W / m-K. Comparisons with published solid wood thermal conductivity values across the range were good. There were no reported values of LSL thermal conductivity at various moisture content levels.

Keywords


Thermal conductivity; Red spruce; Laminated strand lumber

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126