Effect of Process Parameters in the Thermomechanical Densification of Pinus elliottii and Eucalyptus grandis Fast-growing Wood

Anderson Pertuzzatti, André Luiz Missio, Pedro Henrique Gonzalez Cademartori, Elio José Santini, Clovis Roberto Haselein, Camila Berger, Darci Alberto Gatto, Gianluca Tondi

Abstract


Densification parameters were investigated for the fast-growing pine and eucalyptus. Both woods showed optimal results in terms of apparent density and mechanical properties when milder treatments of 150 °C were applied. Pine showed mass loss and improved mechanical properties with a longer heating time of 60 min, while eucalypt performed better with shorter treatments of 30 min. Eucalypt has more highly acetylated hemicelluloses, mainly composed of xylose units, which degrade more quickly with consequent decrease in mass and mechanical properties. However, apparent densities close to 1.0 g·cm-3 were obtained, and greatly enhanced bending properties, hardness, and impact resistance were observed, especially when the optimal parameters were used. Treatments at 170 °C or greater, while resulting in well-densified specimens, yielded inferior mechanical properties. The densified woods also presented initial apparent contact angles greater than 85°, highlighting a considerable increase of hydrophobicity. The densification process therefore allows these less valuable timber species to be used in applications such as flooring and decking.

Keywords


Thermal modification; Plastification; Wood resistance; Physical properties; Hydrophobization

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126