Effect of Thermal Treatment on the Chemical, Physical, and Mechanical Properties of Pedunculate Oak (Quercus robur L.) Wood

Iveta Čabalová, František Kačík, Rastislav Lagaňa, Eva Výbohová, Tatiana Bubeníková, Ingrid Čaňová, Jaroslav Ďurkovič

Abstract


Changes in the chemical composition and selected physico-mechanical properties of pedunculate oak (Quercus robur L.) wood samples were assessed after thermal treatment. Heat treatment was performed at 160, 180, and 200 °C in an oxidizing atmosphere. The contents of the extractives, lignin, cellulose, holocellulose, and saccharides, and the structural changes in the functional groups were determined. Changes in the colour traits, wood density, compression strength parallel to the grain, and compression modulus of elasticity were also determined. The decrease in the holocellulose content caused by the degradation of non-glucosic saccharides was observed during thermal treatment. The contents of both the extractives and lignin increased. The syringyl to guaiacyl (S/G) ratio in the lignin increased because of the preferential condensation of guaiacyl units. The physical and mechanical properties of pedunculate oak wood, such as density, equilibrium moisture content, colour lightness, and yellowness, decreased as the temperature increased. The compression strength and redness varied during thermal treatment, and reached maximum values during the treatment at 180 °C. The modulus of elasticity showed non-significant differences. Three groups of heat treatment clusters were distinguished in the multivariate wood trait analysis and were clearly segregated from each other.

Keywords


Pedunculate oak wood (Quercus robur L.); High temperature treatment; Wood chemical components; Infrared spectroscopy; Colour of wood; Physical properties; Mechanical properties

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126