Automating Data Collection in Motor-manual Time and Motion Studies Implemented in a Willow Short Rotation Coppice

Stelian Alexandru Borz, Nicolae Talagai, Marius Cheţa, Alex Gavilanes Montoya, Danny D. Castillo Vizuete

Abstract


Time and motion studies are often used to evaluate the performance of various product systems. However, traditional studies are characterized by a series of technical limitations, and they require many resources. This study tested the capability of a low-cost Global Positioning System (GPS) receiver and an accelerometer unit to automate the field data collection for characterizing motor-manual felling of willow short rotation coppices. The results were promising. By thresholding the acceleration data, the running and stopped engine states were accurately separated. Also, by combining the GPS speed with the acceleration data, followed by threshold setting and data visualization in the Geographic Information System software, detailed time categories, such as productive, working, and non-working times, could be separated. The methods described herein could be used to manage long-term field data collection, as such operations are affected by many operational factors.

Keywords


Automation; Global positioning system; Accelerometer; Thresholding; Geographic information system; Willow; Short rotation coppice; Motor-manual; Harvesting

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126