Effect of Number of Saw Blade Teeth on Noise Level and Wear of Blade Edges during Cutting of Wood

Monika Kvietková, Milan Gaff, Miroslav Gašparík, Richard Kminiak, Anton Kriš


The effect of varying the number of saw blade teeth while transversally cutting beech (Fagus sylvatica L.) wood on the noise level and saw blade lifetime between two sharpenings was tested. The experiment was carried out with raw beech wood samples with dimensions of 25 x 100 x 1000 mm and circular saw blades with cemented carbide tips (24, 40, and 60 teeth). The saw blade diameters were identical (D = 250 mm), as were the cutting wedge angle geometries (α = 15°, β = 60°, γ = 15°). The saw blades were selected based on commonly used blades (in the Czech Republic and Slovakia) for the transversal cutting of the given wood species. Neither the cutting speed (vc = 62 m/s) nor the feed force (Fp = 75 N) were changed during the cutting process. The results suggest that the number of saw blade teeth is an important factor that affects the noise level of saw blade during sawing as well as the wear of cutting edge.


Noise level; Circular saw blade; Wear of cutting edge; Number of teeth; Beech wood

Full Text:


Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucia-bioresources@ncsu.edu URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126