Brightness Reduction of Mechanical Pulp in the Wet End of a Paper Machine: The Effect of Different Ions in the Circulation Water

Pekka Unto Antero Varhimo, Jonas Konn, Marcus Karl-Johan Lillandt, Jouni Tapio Paltakari


Darkening of the fines and fiber fraction of peroxide-bleached thermo-mechanical pulp (TMP) was studied on a laboratory scale using a device that simulates the short circulation of a paper machine. Selected chemicals were dissolved in the circulation water to study the effect of different cations and anions. Ferrous ions darkened the fines and fiber fraction by increasing the light absorption. It is very important to keep the iron content of the pulp and white water as low as possible because even low contents of iron have a negative effect on the brightness of produced paper. Also, chloride ions decreased the brightness by increasing the light absorption of the fines and fiber fraction. Calcium ions increased both the light absorption and light scattering of the fines fraction. The increased light absorption dominated and the brightness decreased. Calcium chloride is used very commonly as a model chemical for calcium ions in laboratory tests, but the use of it is not recommended, if the darkening phenomena are studied, because chloride ions decrease the brightness. Aluminum ions increased the brightness of the fines fraction by increasing the light scattering. Manganese, sodium, sulfate, or carbonate ions did not affect the optical properties.


Brightness reduction; Fines; Thermomechanical pulp; Mechanical pulp; Wet end; Water circulation; Cation; Anion

Full Text:


Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022,; Lucian A. Lucia, (919) 515-7707, URLs:; ISSN: 1930-2126