Effect of Liquid to Solid Ratio on Autohydrolysis of Eucalyptus globulus Wood Meal

Mehmet Sefik Tunc


Autohydrolysis of Eucalyptus globulus both with and without the addition of 5 g/L formic acid was explored for different liquid-to-solid (L/S) ratios at 150 ºC for 100 min. The L/S ratio has an impact on the dissolution of wood components during prehydrolysis. The extraction yield of wood components other than lignin decreased with increasing L/S ratio, while lignin removal increased with increasing L/S ratio, irrespective of acid reinforcement. The molecular weight (Mw) of dissolved hemicelluloses and lignin remained relatively constant. The average degree of polymerization of hemicelluloses isolated from the hot water extract was between 7 and 8 over a L/S ratio range from 3:1 to 50:1. The cellulose to glucose conversion yield of pretreated wood samples improved during prehydrolysis with 5 g/L formic acid. Although the conversion yield of autohydrolyzed wood meal stayed relatively constant, the conversion yield of dilute acid-pretreated wood samples increased with increasing L/S ratio.


Autohydrolysis; Eucalyptus; Fractionation; Formic acid; Hemicelluloses; Liquid to solid ratio; Preextraction; Prehydrolysis; Wood; Xylan

Full Text:


Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126