Method of Black Liquor Combustion to Remove Silicon from Wheat Straw Pulping

Yongjian Xu, Hao Sun, Xue Li, Dingjun Zhang, Yong Tian


The effects of aluminium sulphate and sodium aluminate on physical and chemical properties of wheat straw pulp black liquor were studied. Results showed that the expansion rate was enhanced by increasing the aluminum salt content; furthermore, the effect of sodium aluminate was better than that of aluminum sulfate. The maximum desilication rate of 92.31% was reached with the addition of 3% sodium aluminate. A rheometer showed that aluminum salt had little impact on the viscosity of thick black liquor, so even at a high temperature it could be conveyed by pumps in paper mill at 110 °C. The effect of aluminium salt on the silicon removal rate during black liquor combustion was also studied. The experimental results showed that both aluminium sulphate and sodium aluminate helped to remove silicon. The desilication rate of sodium aluminate reached 62.33%, higher than that of aluminum sulphate. SEM-EDX illustrated that the aluminum and silicon ions were formed into insoluble precipitates. It was optimal to use 3% sodium aluminate as desilication agent.


Thick black liquor; Rate of inflation; Rheometer; Desilication; SEM – EDX

Full Text:


Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022,; Lucian A. Lucia, (919) 515-7707, URLs:; ISSN: 1930-2126