Application of Raw and Alkaline-modified Coconut Shaft as a Biosorbent for Pb2+ Removal

Edwin Andrew Ofudje, Olubunmi Kolawole Akiode, Gabriel Opeoluwa Oladipo, Adebusayo Emmanuel Adedapo, Lateefah Olanike Adebayo, Ayodeji Olushola Awotula


The sorption capacity of untreated and alkaline-treated coconut shaft biosorbents for the removal of Pb2+ from aqueous solution was investigated in batch experiments. Effects of contact time, biosorbent dose, initial metal concentration, and pH on the sorption capacity were investigated. Optimum Pb2+ removal of 17.6 and 22.1 mg/g by untreated and alkaline-treated biomass was achieved at an initial metal concentration of 150 mg/L, a biomass dose of 0.7 g, a contact time of 80 min, and a pH of 4.0. The sorption data fitted well into the Langmuir isotherm, while kinetic modeling of the data from untreated biomass indicated conformity with the Lagergren pseudo-first-order model, whereas data from the treated biomass fit well with the Elovich model. FT-IR results gave indications of possible functional groups on the cell walls of the coconut shaft, including alcohols, amines, carboxylic acids, ester, and ethers. Thus, alkaline treatment of the coconut shafts enhanced the biosorption ability of Pb2+ onto the coconut shaft biomass.


Biosorption; Coconut; Isotherms; Kinetic; Lead

Full Text:


Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022,; Lucian A. Lucia, (919) 515-7707, URLs:; ISSN: 1930-2126