Combustion Characteristics of Wood Panels Treated with Phosphorus-Nitrogen Additives

Eui Jin, Yeong-Jin Chung


The combustion characteristics were evaluated for wood samples either untreated or treated with a piperazine-N-N´-bis(methylenephosphonic acid) flame retardant. Combustion properties were investigated using a cone calorimeter (ISO 5660-1 2002). The time to ignition of samples treated with the chemical additive was delayed by 193%, 124%, and 61% for maple, ash, and cypress, respectively, compared with the untreated samples. Compared with the untreated sample, the PHRR value was reduced by 20% for t-ash and by 2.6% for cypress, whereas it was increased by 0.28% for t-maple. The time of PHRR for the treated sample was shifted to 1605 s (698%), 470 s (45%), and 340 s (32%) for cypress, ash, and maple, respectively, compared with the untreated samples. The reduced PHRR value and postponed time to PHRR indicated that combustion was suppressed by the thicker char layer. The mean CO yield of t-ash and t-cypress was increased by 2.9% and 27%, respectively, compared with the untreated sample, but t-maple was reduced by 46% compared with maple. The mean CO2 yield of t-maple, t-ash, and t-cypress was decreased by 4%, 13%, and 37%, respectively, compared with the untreated sample. The combustion properties of treated wood were inhibited more than those of untreated wood.


Flame retardant; Time to ignition; Peak heat release rate; Carbon monoxide; Carbon dioxide; Cone calorimeter

Full Text:


Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022,; Lucian A. Lucia, (919) 515-7707, URLs:; ISSN: 1930-2126