Preparation of 5-(Hydroxymethyl)furfural by the Catalytic Degradation of Cellulose in an Ionic Liquid/Organic Biphasic System

Heng Zhang, Suxiang Li, Xue Song, Pengfei Li, Junxun Li


This work has established the optimum reaction conditions in a biphasic system using microcrystalline cellulose as the raw material, an ionic liquid as the solvent, metal chloride as a catalyst, and an organic solvent as the extraction reagent. The optimum reaction conditions were microcrystalline cellulose:ionic liquid - 1:10 (mass ratio), chromium(III) chloride (CrCl3) - 6.8 mol% (based on the glucose unit of cellulose molecule), reaction time - 3 h, temperature - 130 °C, and mass ratio of 1-butyl-3-methyl-imidazolium chloride ([BMIM]Cl) to methylbenzene - 1:4.4]. Under these conditions, the yields of glucose and 5-(hydroxymethyl)furfural (5-HMF) were 27% and 55%, respectively. The solvent [BMIM]Cl could be reused twice. The first recovery rate of [BMIM]Cl was approximately 70.9%. The product 5-HMF was obtained in 64.7% yield, which decreased after the first [BMIM]Cl recycling. The second recovery rate of [BMIM]Cl was 45%. The yield of 5-HMF was 39.6%, which decreased after the second recycling of [BMIM]Cl. In this paper, the energy consumption, operation, reutilization of [BMIM]Cl, and product yields of a one-phase system and a biphasic system were compared. Experimental results demonstrated that the biphasic solvent system was suitable for the degradation of cellulose to glucose and 5-HMF.


Microcrystalline cellulose; Organic solvent; 5-HMF; Ionic liquid

Full Text:


Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022,; Lucian A. Lucia, (919) 515-7707, URLs:; ISSN: 1930-2126