An Evaluation of Strength Performance of the Edge Connections between Cross-laminated Timber Panels Reinforced with Glass Fiber-reinforced Plastic

Yo-Jin Song, In-Hwan Lee, Soon-Il Hong

Abstract


The strength performance of edge connections between the cross-laminated timber (CLT) panels, as currently applied to CLT construction, was compared to that of connections reinforced with glass fiber-reinforced plastic (GFRP) by means of a tensile-type shearing test. In this study, the reinforced half-lapped connection is intended to prevent CLT from coming apart due to failure of self-tapping screws (STS) by bonding GFRP sheets to connections between CLT panels. The end-distance and edge-distance of this reinforced half-lapped connection were designed to equal 5D (where D is the fastener diameter) and 4D, respectively, which is shorter than the 6D recommended by European Technical Approval (ETA). Nevertheless, the yield strength was increased by 7%, and the stiffness by 92%, compared to the non-reinforced half-lapped connection. In addition, the internal spline connections using GFRP-reinforced plywood were 57 and 36% higher than the connection made up of LVB or plywood, respectively, and the energy dissipation percentages were 400 and 76%, respectively. These results indicate that the reinforcement effect of the connection by the GFRP was very significant. On the other hand, the half-lapped connection of the larch CLT improved the strength performance as the end-distance increased, and the end-distance had a greater effect on the strength performance than the edge-distance.

Keywords


Cross-laminated timber; CLT edge connection; Self-tapping screw; Half-lapped; Spline; Shear test; Shear test; Glass fiber-reinforced plastic

Full Text:

PDF


Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucia-bioresources@ncsu.edu URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126