Physical and Mechanical Properties of Clear Wood from Red Oak and White Oak

Marly Gabriela Carmona Uzcategui, R. Daniel Seale, Frederico Jose Nistal França

Abstract


Red oak and white oak are common names of species that grow in the eastern United States with great economic importance. This study aimed to evaluate the visual, physical, and mechanical properties of small clear wood specimens of red oak (Quercus spp.) and white oak (Quercus spp.). The experiments were carried out on defect-free specimens extracted from boards supplied by the Stairbuilders Manufacturers Association (SMA) members. The material was obtained from sawmills located in the eastern half of the United States. A total of 181 boards (90 boards of red oak and 91 boards of white oak) were submitted for tests. Compression strength was found to be higher than the values published in past studies. Red oak exhibited higher MOE and MOR values compared to white oak. The mechanical properties for red oak and white oak have not changed substantially because the average values remain in a range that is very close to the values published in the past 100 years. Thus, the values from the Wood Handbook can still be used for engineering purposes.

Keywords


Modulus of elasticity; Modulus of rupture; Compression parallel; Compression perpendicular; Janka hardness

Full Text:

PDF


Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucia-bioresources@ncsu.edu URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126