Optimization of Oil Palm-based Cellulose and Hydroxyapatite-Carbon Composite Electrode for Trace Pb(II) Ions Detection in Aqueous System

Huma Ajab, Asim Yaqub, Muhammad Shahid Nazir, Mohd Zul Helmi Rozaini, Mohd Azmuddin Abdullah

Abstract


An electroanalytical technique was devised using oil palm-based cellulose and hydroxyapatite as modifiers to carbon electrodes for Pb(II) ions detection in an aqueous system. The cyclic voltammetry scan suggested increased active binding sites and faster electron transfer with quasi-reversible redox peaks with a larger anodic current peak and smaller oxidation potential values. The optimal conditions were attained using 10% modifier at pH 2 in 0.1 M HCl, −1.2 V deposition potential, 270 s deposition time, 25 Hz frequency, 0.020 V amplitude, rotation speed of 700 rpm, and the step potential of 0.005 V. The square wave anodic stripping voltammetry established at optimum level exhibited excellent selectivity and stability from 10 ppb to 100 ppb for Pb(II) ions detection. Sharp anodic peaks were observed at -0.48 V for Pb(II) ions with the detection limit of 0.095 ± 0.32 ppb and limit of quantitation of 0.32 ± 0.32 ppb.

Keywords


Metal ion; Carbon composite electrode; Cellulose; Hydroxyapatite; Square-wave voltammetry

Full Text:

PDF


Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucia-bioresources@ncsu.edu URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126