BioResources

• Home
• About
• Login
• Search
• Current
• Archives
• For_Authors
• Editorial Board
• Editorial Policies
• Journal Home Page

Home > Archives > Vol 13, No 1 (2018)

Table of Contents

Editorials (Opinion Pieces)

Superhydrophobic Coatings with Edible Biowaxes for Reducing or Eliminating Liquid Residues of Foods and Drinks in Containers Peng Wang, Xueren Qian, Jing Shen

PDF 1-2

Engineering Cell Wall-Degrading Enzymes into Growing Plants to Improve Lignocellulosic Ethanol Production Shengdong Zhu, Maolin Yang, Fang Luo, Xiaojun Yang, Yongpin Xue

PDF 3-5

Research Articles (Peer Reviewed)

Improvement of Bamboo Properties via In Situ Construction of Polyhydroxyethyl Methylacrylate and Polymethyl Methylacrylate Networks Huaping Wu, Xiushu Yang, Jin Rao, Yan Zhang, Fangli Sun

PDF 6-14

Manufacturing Biocomposites Using Black Pine Bark and Oak Bark Erkan Avci, Mehmet Acar, Oktay Gonultas, Zeki Candan

PDF 15-26

Optimization of Pretreatment and Alkaline Cooking of Wheat Straw on its Pulpability Using Response Surface Methodology Jinpeng Li, Bin Wang, Kefu Chen, Xiaojun Tian, Jinsong Zeng, Jun Xu, Wenhua Gao

PDF 27-42

Marimba Instrument Construction from Kayu Malam Wood (Diospyros maingayi) Sinin Hamdan, Hasnizam Abdul Wahid, Iran Amri Musoddiq, Nyawai Yohanes

PDF 43-52

Production of Sulfur Containing Kraft Lignin Products John P. W. Inwood, Leila Pakzad, Pedram Fatehi

PDF 53-70

Mechanical Strength, Thermal Stability, and Hydrophobicity of Fiber Materials after Removal of Residual Lignin Quanliang Wang, Shengling Xiao, Sheldon Q. Shi, Liping Cai

PDF 71-85

The Effects of Wood Storage on the Chemical Composition and Indigenous Microflora of Eucalyptus species Used in the Pulping Industry Lucretia Ramnath, Bruce Sithole, Roshini Govinden

PDF 86-103

Chemical and Physical Parameters of Different Modifications of Rape Straw (Brassica napus L.) Tereza Částková, Štěpán Hýsek, Adam Sikora, Ondřej Schönfelder, Martin Böhm

PDF 104-114

Selective Electroreduction of Glycerol to 1,2-Propanediol on a Mixed Carbon-Black Activated Carbon Electrode and a Mixed Carbon Black-Diamond Electrode Ching Shya Lee, Mohamed Kheireddine Aroua, Wan Mohd Ashri Wan Daud, Patrick Cognet, Yolande Pérès, Mohammed A. Ajeel

PDF 115-130

Inelastic Bending Performances of Laminated Bamboo Beams: Experimental Investigation and Analytical Study Aiping Zhou, Yulin Bian, Yurong Shen, Dongsheng Huang, Mengjie Zhou

PDF 131-146

Effect of Alkyl Ketene Dimer on the Physical, Mechanical, and Biological Durability of Plywood Gaye Köse Demirel, Halime Güdül, Ali Temiz, Süleyman Kuştaş, İsmail Aydın

PDF 147-156

Effect of Thermal Treatment on the Chemical, Physical, and Mechanical Properties of Pedunculate Oak (Quercus robur L.) Wood Iveta Čabalová, František Kačík, Rastislav Lagaňa, Eva Výbohová, Tatiana Bubeníková, Ingrid Čaňová, Jaroslav Ďurkovič

PDF 157-170

Calculating the Equilibrium Moisture Content for Wood Based on Humidity Measurements Philip H. Mitchell

PDF 171-175

Structural Stabilization of Granular Sludge by Addition of Calcium Ions into Aerobic Bioreactors Ismarley Lage Horta Morais, Claudio Mudadu Silva, Jose Cola Zanuncio, Antonio Jose Vinha Zanuncio

PDF 176-191

Hydrophobic Noncrystalline Porous Starch (NCPS): Dispersed Silver Nanoparticle Suspension as an Antibacterial Coating for Packaging Paper Chao Dang, Yihui Yin, Ming Xu, Junwen Pu

PDF 192-207

Production of Furan Compounds from Cryptomeria japonica using Pyridinium Chloride under Various Conditions Koichi Yoshioka, Tatsuhiko Yamada, Hiroyuki Ohno, Hisashi Miyafuji

PDF 208-219

Purification and Characterization of Xylanase from Spent Mushroom Compost and its Application in Saccharification of Biomass Wastes Hui Lin, Mei-Jing Sun, Jia-Huan Li, Quan-Ming Xu, Bin Yang, Qi Wang, Wei-Jie Xie, Shu-Jing Sun, Kai-Hui Hu, Liao-Yuan Zhang

PDF 220-230

Isolation of Lignin from Masson Pine by Liquid-Liquid Extraction Based on Complete Dissolution in NaOH Aqueous Solution Wenjuan Wu, Bo Jiang, Lingfeng Yang, Yongcan Jin

PDF 231-240

Application of Inorganic Particles Modified with Polyvinylamine to Produce Antibacterial Paper Jegon Lee, Sang-soon Kim, Kyujeong Sim, Dong-Hyun Kang, Hye Jung Youn

PDF 241-255

Effect of Tenon Size on Static Front to Back Loading Performance of Wooden Chairs in Comparison with Acceptable Design Loads Halil Kılıç, Ali Kasal, Tolga Kuşkun, Mehmet Acar, Yusuf Ziya Erdil

PDF 256-271

Mimusops elengi Seed Shell Powder as a New Bio-Filler for Polypropylene-based Bio-Composites Mathialagan Muniyadi, Tiffany Yit Siew Ng, Yamuna Munusamy, Zhong Xian Ooi

PDF 272-289

Influence of Hemp Plant Eccentric Growth on Physical Properties and Chemical Compounds of Hemp Hurd Xiaoping Li, Ning Wu, Jeffery J. Morrell, Guanben Du, Zhengjie Tang, Zhangkang Wu, Chenggang Zou

PDF 290-298

Study on the Mass Transfer Enhancement in Biofilms Applied in Papermaking Wastewater Treatment Mei Pan, Jinlong Yan, Cheng Ding, Weixing Ma, Jiangxiang Jin, Ye Yuan, Yuxi Chen

PDF 299-312

Load-carrying Capacity of Intermediately Slender Parallel Strand Bamboo Columns with a Rectangular Cross Section under Biaxial Eccentric Compression Xiaorui Wang, Aiping Zhou, Ying Hei Chui

PDF 313-330

Effects of Acid Pre-Treatments on the Swelling and Vapor Sorption of Thermally Modified Scots Pine (Pinus sylvestris L.) Wood Reza Hosseinpourpia, Stergios Adamopoulos, Carsten Mai

PDF 331-345

Determining Material Suitability for Low-Rise Housing in the Philippines: Physical and Mechanical Properties of the Bamboo Species Bambusa blumeana Corinna Salzer, Holger Wallbaum, Marina Alipon, Luis Felipe Lopez

PDF 346-369

Experimental Analysis of New Furniture Joints Bogdan Branowski, Marek Zabłocki, Maciej Sydor

PDF 370-382

Optimization of the Hydrolysis Condition of Pretreated Corn Stover using Trichoderma viride Broth based on Orthogonal Design and Principal Component Analysis Kunya Hu, Zhicai Zhang, Feng Wang, Yajuan Fan, Jinhua Li, Lu Liu, Jia Wang

PDF 383-398

A Combined Process for Production of Fumaric Acid and Xylooligosaccharides from Corncob Xin Li, Lei Yang, Ximei Gu, Chenhuan Lai, Caoxing Huang, Qiang Yong

PDF 399-411

Catalytic Effects of Various Acids on Microwave-assisted Depolymerization of Organosolv Lignin Maimaitiaili Tayier, Dengle Duan, Yunfeng Zhao, Rongsheng Ruan, Yunpu Wang, Yuhuan Liu

PDF 412-424

Kinetics of Ozone Bleaching of Eucalyptus Kraft Pulp and Factors Affecting the Properties of the Bleached Pulp Tian He, Mingyou Liu, Xiaofei Tian

PDF 425-436

Porous Biomass Carbon Coated with SiO2 as High Performance Electrodes for Capacitive Deionization Guixiang Quan, Hui Wang, Fan Zhu, Jinlong Yan

PDF 437-449

Environmentally Friendly Bleaching on Bamboo (Neosinocalamus) Kraft Pulp Cooked by Displacement Digester System Peiyi Li, Qingqing Hou, Meiyun Zhang, Xinping Li

PDF 450-461

Wood Cladding in Non-residential Construction: Overcoming the Barriers to Leverage the Opportunities Samuel Guy-Plourde, Michel de Blois, Pierre Blanchet, Costel Barbuta, François Robichaud

PDF 462-476

Mode II Fracture Toughness of Bamboo Scrimber with Compact Shear Specimen Guofang Wu, Yong Zhong, Yingchun Gong, Haiqing Ren

PDF 477-486

Comparative Study of Irradiated and Non-Irradiated Recycled Polypropylene/Peanut Shell Powder Composites under the Effects of Natural Weathering Degradation Nor Fasihah Zaaba, Hanafi Ismail

PDF 487-505

Fire Properties of Pinus densiflora Utilizing Fire-retardant Chemicals Based on Borate and Phosphorus (II) – Thermal and Gas Emission Characteristics Hyun Jeong Seo, Nam Kyun Kim, Jeong Min Jo, Min Chul Lee

PDF 506-521

Economic Determinants and Analysis of the European Union Wood Industry SMEs Employment Martina Basarac Sertić, Andreja Pirc Barcic, Kristina Klarić

PDF 522-534

Synthesis and Characterization of Carboxymethyl Cellulose from Oil Palm Empty Fruit Bunch Stalk Fibres Dzieda Muhamad Parid, Nur Aliaa Abd Rahman, Azhari Samsu Baharuddin, Mohd Afandi P. Mohammed, Amiruddin Mat Johari, Siti Zubaidah Abdul Razak

PDF 535-554

Thermal Conductivity of Wood with ABS Waste Core Sandwich Composites Subject to Various Core Modifications Luminita-Maria Brenci, Camelia Cosereanu, Octavia Zeleniuc, Sergiu-Valeriu Georgescu, Adriana Fotin

PDF 555-568

Enzymatic Potential of Native Fungal Strains of Agave Residues Maria Gorety Contreras-Hernández, Elva T. Aréchiga-Carvajal, Martha Rocio Moreno-Jiménez, Silvia Marina González-Herrera, Javier López-Miranda, Lilia Arely Prado-Barrágan, Olga Miriam Rutiaga-Quiñones

PDF 569-585

Orange Wood for Parquet and Engineered Flooring Use Stefano Berti, Paolo Burato, Paolo Dionisi-Vici, Ottaviano Allegretti

PDF 586-596

Using Surface Modified E-Glass Fiber Cloths to Enhance Poplar Laminated Veneer Lumber Composites: Effects of Modification Conditions, Gluing Processes, Hot-Pressing Parameters, and Assembly Patterns on Physical-mechanical and Interfacial Properties Wei Song, Zhengdong Xu, Shuangbao Zhang

PDF PDF 597-631

Synthesis, Curing, and Properties of an Epoxy Resin Derived from Gallic Acid Antonella Tarzia, Jeanette Montanaro, Michele Casiello, Cosimo Annese, Angelo Nacci, Alfonso Maffezzoli

PDF 632-645

Motion of Chips When Leaving the Cutting Zone during Chipboard Plane Milling Pavel Rudak, Stefan Barcik, Mats Ekevad, Oksana Rudak, Marek Vanco, Jaroslava Stefkova

PDF 646-661

Biological Performance of Novel Hybrid Green Composites Produced from Glass Fibers and Jute Fabric Skin by the VARTM Process Evren Terzi, Saip Nami Kartal, Musrizal Muin, Ahmed H. Hassanin, Tamer Hamouda, Ali Kılıç, Zeki Candan

PDF 662-677

Safety Evaluation of Deinked Pulp Containing Offset Thermochromic Inks Sonja Jamnicki Hanzer, Mirela Rožić, Marina Vukoje, Mirela Jukić, Antonija Galić

PDF 678-690

Cellulose Isolation from Corn Stalk Treated by Alkaline Biochars in Solvent Systems Le Liu, Shiqiu Zhang, Xue Yang, Mei Ting Ju

PDF 691-703

An Effective Modification with Mild Alkali Pretreatment for Enhancing the Biodegradation of Wheat Straw by Pycnoporus sanguineus NFZH-1 Nianjie Feng, Yu Fu, Chuanhuai Wang, Qian Wu

PDF 704-714

Comparative Study of Two Softwood Species Industrially Modified by Thermowood® and Thermo-Vacuum Process Mohamed Jebrane, Michael Pockrandt, Ignazia Cuccui, Ottaviano Allegretti, Ernesto Uetimane Jr., Nasko Terziev

PDF 715-728

Nanostarch Surface Coating of Lightweight Coated Paper Qijie Chen, Xufang Dong, Liling Zhou, Xueming Zheng, Jianhui Wang, Ping Wang

PDF 729-739

Preparation of Composite Films of Methacryloyl-modified Lignocresol and Polylactic Acid Dongliang Xu, Shuang Qian, Fang Zhang, Guolin Tong, Hao Ren

PDF 740-751

Cellulomonas sp. Isolated from Termite Gut for Saccharification and Fermentation of Agricultural Biomass Iram Batool, Muhammad Gulfraz, Muhammad Javaid Asad, Faryal Kabir, Sobia Khadam, Asma Ahmed

PDF 752-763

Changes in Physical Properties of Sugi, Hinoki, and Korean Pine Wood after Fire-retardant Treatment Mingyu Wen, Yaoxing Sun, Junyou Shi, Heejun Park

PDF 764-775

Quality of Silicone Coating on the Veneer Surfaces Gabriela Slabejova, Maria Smidriakova, David Panis

PDF 776-788

Modeling and Optimization of Fiber Quality and Energy Consumption during Refining Based on Adaptive Neuro-fuzzy Inference System and Subtractive Clustering Yunbo Gao, Jun Hua, Liping Cai, Guangwei Chen, Na Jia, Liangkuan Zhu, Hui Wang

PDF 789-803

Tree-ring width and Variation of Wood Density in Fraxinus excelsior L. and Quercus robur L. Growing in Floodplain Forests Kyriaki Giagli, Jan Baar, Marek Fajstavr, Vladimír Gryc, Hanuš Vavrčík

PDF 804-819

Blue-Agave Fiber-Reinforced Polypropylene Composites for Automotive Applications Amy Ellen Langhorst, James Burkholder, Jun Long, Robert Thomas, Alper Kiziltas, Deborah Mielewski

PDF 820-835

Intra-Ring Properties of Earlywood and Latewood Sections of Sessile Oak (Quercus petraea) Wood Ümit Büyüksarı, Nusret As, Türker Dündar

PDF 836-845

Comparison of Three Fourier Transform Infrared Spectroscopy Sampling Techniques for Distinction between Lignocellulose Samples Mohit Gogna, Robyn E. Goacher

PDF 846-860

Effect of Thermal Aging on Colour and Glossiness of UV System Varnish-applied Laminated Parquet Layers Umit Ayata, Sirri Sahin, Bruno Esteves, Levent Gurleyen

PDF 861-868

An Exploratory Study of Smartphone and Smartphone Application Use in the U.S. Forest Products Industry Songyi Han, R. Daniel Seale, Rubin Shmulsky

PDF 869-880

Inserting Poly(ε-caprolactone) into Wood Cell Wall Structures for Dehydration and Consolidation of Waterlogged Scots Pine Wood Ren Li, Zhiguo Zhang, Gang Liu, Xiaoshuai Han, Junwen Pu

PDF 881-893

Selective Biodegradation of Grape Pomace Tannins by Aspergillus niger and Application in Wood Adhesive Ping Lan, Nicolas Brosse, Ju Qing Cui, Hai Yan Mao, Rui Yang

PDF 894-905

Structural Characterization and Solid State Properties of Thermal Insulating Cellulose Materials of Different Size Classifications Mathew Adefusika Adekoya, Sunday Samuel Oluyamo, Olugbenga Oludayo Oluwasina, Adewunmi Isaac Popoola

PDF 906-917

Sensitivity of Ultrasonic Wave Velocity Estimation Using the Christoffel Equation for Wood Non-Destructive Characterization Luis Espinosa, Loïc Brancheriau, Flavio Prieto, Philippe Lasaygues

PDF 918-928

Effects of Convection and Microwave Drying Schemes on the Characteristics and Sound Absorption of Acoustic Oil Palm Boards Panya Dangvilailux, Jarruwat Charoensuk

PDF 929-944

Modelling of Radio-frequency Heating of Piles of Pinus radiata Wood Carlos Salinas, Rubén Ananías, Diego A. Vasco

PDF 945-953

Kinetic Models and Effects of Mn(II) Ion on Ethanol Production from Cornstalks Kun Chen, Xiaofei Jing, Hao Liao

PDF 954-966

Preparation and Characterisation of Optimised Hydrochar from Hydrothermal Carbonisation of Macadamia Shells Fangyu Fan, Zhifeng Zheng, Yun Liu, Yuanbo Huang, Zhengjun Shi

PDF 967-980

Engineering a Chimeric Lipase-cutinase (Lip-Cut) for Efficient Enzymatic Deinking of Waste Paper Min Liu, Shuya Yang, Liangkun Long, Yunfeng Cao, Shaojun Ding

PDF 981-996

The Effect of Different Catalysts and Process Parameters on the Chemical Content of Bio-oils from Hydrothermal Liquefaction of Sugarcane Bagasse Xiuyi Yan, Jiuli Ma, Wei Wang, Yanan Zhao, Jinghui Zhou

PDF 997-1018

Hydrochar Derived from Anaerobic Solid Digestates of Swine Manure and Rice Straw: A Potential Recyclable Material Hongmei Jin, Enhui Sun, Yueding Xu, Ruihua Guo, Mengjie Zheng, Hongying Huang, Songhe Zhang

PDF 1019-1034

Longitudinal Vibration Test for the Use of a Circular Truncated Cone as a Log Model of Japanese Cedar Yoshitaka Kubojima, Yukari Matsumura, Youki Suzuki

PDF 1035-1041

Property Improvement of Thin High-Density Fiberboard Panels Used as Door-Skins Nicolae Badin, Mihaela Campean, Karoly Lengyel, Mihai Ispas, Bogdan Bedelean

PDF 1042-1054

Preparation and Barrier Properties of Nanocellulose / Layered Double Hydroxide Composite Film Mengmeng Wang, Hailong Li, Chao Du, Yun Liang, Mengru Liu

PDF 1055-1064

A Method for Integrated Optimization of Chlorine Dioxide Delignification of Bagasse Pulp Yongjun Yin, Xueping Song, Chongxin Li, Shuangxi Nie

PDF 1065-1074

Low Temperature Hydrothermal Fabrication of Tungsten Trioxide on the Surface of Wood with Photochromic and Superhydrophobic Properties Minglei Sun, Kuiyan Song

PDF 1075-1087

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers Rui Zhai, Jinxia Ma, Zhijun Hu, Jingwen Hou

PDF 1088-1106

White Poplar Microwave Pyrolysis: Heating Rate and Optimization of Biochar Yield Xuhui Li, Kunquan Li, Hua Li, Hamed El-Mashad, Bryan Jenkins, Wenqing Yin

PDF 1107-1121

Estimating the Inter-fiber Bonding Capacities of High-yield Pulp (HYP) Fibers by Analyzing the Fiber Surface Lignin and Surface Charge Hailong Li, Hongjie Zhang, Sarah Legere, Yonghao Ni, Xuejun Qian, Hongshun Cheng, Fengshan Zhang, Xiaoliang Li

PDF 1122-1131

Practical and Theoretical Study of the Adsorption Performances of Straw-Based Tertiary Amine-Supported Material toward Sulfur Dioxide in Flue Gas Liming Sun, Xiaofan Zhu

PDF 1132-1142

Effects of Different Induction Media as Inducers on Laccase Activities of Pleurotus ostreatus Strains in Submerged Fermentation Qi An, Hong-Fei Ma, Mei-Ling Han, Jing Si, Yu-Cheng Dai

PDF 1143-1156

Effects of Corn Starch and Kappaphycus alvarezii Seaweed Blend Concentration on the Optical, Mechanical, and Water Vapor Barrier Properties of Composite Films H. P. S. Abdul Khalil, Suk Wy Yap, Ying Ying Tye, Paridah Md. Tahir, Samsul Rizal, M. R. Nurul Fazita

PDF 1157-1173

Effect of Surface Treatment on the Mechanical Properties of Sugar Palm/Glass Fiber-reinforced Thermoplastic Polyurethane Hybrid Composites A. Atiqah, Mohammad Jawaid, S. M. Sapuan, Mohamad Ridzwan Ishak

PDF 1174-1188

Preparation of 5-Hydroxymethylfurfural Based on the Biphasic System of Ionic Liquid/Ethyl Butyrate Heng Zhang, Zhe Wang, Hongkun Gao

PDF 1189-1201

Pelletizing Pure Biomass Substances to Investigate the Mechanical Properties and Bonding Mechanisms Stefan Frodeson, Gunnar Henriksson, Jonas Berghel

PDF 1202-1222

Oxidative Depolymerizaton of Kraft Lignin and its Application in the Synthesis of Lignin-phenol- formaldehyde Resin Chang Ma, Xiuwen Mei, Yongming Fan, Zhentao Zhang

PDF 1223-1234

Batch and Fixed Bed Adsorption of Pb(II) from Aqueous Solution using EDTA Modified Activated Carbon Derived from Palm Kernel Shell Aloysius Akaangee Pam, Abdul Halim Abdullah, Yen Ping Tan, Zulkarnain Zainal

PDF 1235-1250

Effect of the Interaction between Thermal Modification Temperature and Cutting Parameters on the Quality of Oak Wood Lukáš Kaplan, Monika Sarvašová Kvietková, Miroslav Sedlecký

PDF 1251-1264

Quantitative Prediction of Agarotetrol in Chinese Eaglewood Using Near Infrared Spectroscopy Zheyuan Ding, Li Tong, Haichao Li, Wei Lu, Wenbo Zhang, Xiaofan Bu

PDF 1265-1277

Efficient Conversion of D-Glucose into D-Sorbitol over Carbonized Cassava Dregs-Supported Ruthenium Nanoparticles Catalyst Zengyong Li, Ying Liu, Shubin Wu

PDF 1278-1288

Improving Properties of Particleboards with Reduced Density Karoly Lengyel, Marius Catalin Barbu, Mihaela Campean, Nicolae Badin, Bogdan Bedelean

PDF 1289-1302

Preparation of Pinewood Residues/Recycled HDPE Composites with Potential to Substitute Medium-density Fiberboards Obed E. Rivero-Be, Jhonny M. Peraza-Góngora, Carlos V. Cupul-Manzano, José G. Carrillo-Baeza, Javier Guillén-Mallette, Miguel A. Rivero-Ayala, Alex Valadez-González, Ricardo Herbé Cruz-Estrada

PDF 1303-1328

Mechanics and Crystallinity/Thermogravimetric Investigation into the Influence of the Welding Time and CuCl2 on Wood Dowel Welding Xudong Zhu, Yingying Xue, Sujun Zhang, Jun Zhang, Jie Shen, Songlin Yi, Ying Gao

PDF 1329-1347

Analysis of Mixed Pulping Raw Materials of Eucalyptus globulus and Acacia mangium by Near Infrared Spectroscopy Technique Combined with LASSO Algorithm Ting Wu, Guigan Fang, Long Liang, Yongjun Deng, Yan Lin, Zhixin Xiong

PDF 1348-1359

The Effect of Full-Cell Impregnation of Pine Wood (Pinus sylvestris L.) on Changes in Electrical Resistance and on the Accuracy of Moisture Content Measurement Using Resistance Meters Aleksandra Konopka, Jacek Barański, Kazimierz Orłowski, Karol Szymanowski

PDF 1360-1371

Yield of Pulp, Dimensional Properties of Fibers, and Properties of Paper Produced from Fast Growing Trees and Grasses Kamila Przybysz, Edyta Małachowska, Danuta Martyniak, Piotr Boruszewski, Jolanta Iłowska, Halina Kalinowska, Piotr Przybysz

PDF 1372-1387

Lignin-based Grinding Wheels with Aluminum Oxide: Synthesis and Characterization Jiankun Liang, Jun Zhang, Guanben Du, Shang Feng, Xuedong Xi, Hong Lei

PDF 1388-1400

Process Optimization of Large-Size Bamboo Bundle Laminated Veneer Lumber (BLVL) by Box-Behnken Design Xiaoyi Niu, Jiuyin Pang, Hanzhong Cai, Shan Li, Lei Le, Junhua Wu

PDF 1401-1412

Simulation of Drying Stresses in Eucalyptus nitens Wood Natalia Pérez-Pena, Cristian Chávez, Carlos Salinas, Rubén A. Ananías

PDF 1413-1424

Catalytic Conversion of Corn Stover into Furfural over Carbon-based Solid Acids Wenzhi Li, Tingwei Zhang, Gang Pei

PDF 1425-1440

Study of the Difference between Enzyme Adsorption onto Hydrotropic and Alkali Lignin Separated from Eucalyptus and Bamboo Hongyan Mou, Shubin Wu, Mengyun He, Hao Liu, Hongquan Huang, Chaochao Xu

PDF 1441-1456

Eco- and Material-Efficient Utilization Applications of Biotechnologically Modified Fiber Sludge Matti Juhani Kuokkanen, Olli Kauko Mäentausta, Toivo Johannes Kuokkanen

PDF 1457-1474

Smart Hydrophobic-Hydrophilic Self-Switching Cellulosic Materials Synthesized by Regioselective Functionalization Meiyan Lin, Kunfeng Xia, Pengbo Lu, Yanghao Ou, Lingfeng Su, Detao Liu

PDF 1475-1490

Colemanite: A Fire Retardant Candidate for Wood Plastic Composites Evren Terzi, Saip Nami Kartal, Sabriye Pişkin, Nicole Stark, Aysel Kantürk Figen, Robert H. White

PDF 1491-1509

Cellulose Accessibility and Zeta potentials of Sugarcane Bagasse Pretreated by Green Liquor and Ethanol for High Hydrolysis Efficiency Wenwen Xue, Fuhou Lei, Pengfei Li, Jianxin Jiang

PDF 1510-1524

The Shades of Color of Quercus robur L. Wood Obtained through the Processes of Thermal Treatment with Saturated Water Vapor Ladislav Dzurenda

PDF 1525-1533

Grain Sorghum Drying Kinetics Under Isothermal Conditions Using Thermogravimetric Analyzer Sammy Sadaka, Griffiths Atungulu

PDF 1534-1547

Internal Structural Imaging of Cultural Wooden Relics Based on Three-Dimensional Computed Tomography Guiling Zhao, Zhaowen Qiu, Jun Shen, Zhongji Deng, Jinghua Gong, Dan Liu

PDF 1548-1562

Thermogravimetric Analysis Studies of Thermally-treated Glycerol Impregnated Poplar Wood Rui Liu, Jeffrey J. Morrell, Li Yan

PDF 1563-1575

Effect of Process Parameters in the Thermomechanical Densification of Pinus elliottii and Eucalyptus grandis Fast-growing Wood Anderson Pertuzzatti, André Luiz Missio, Pedro Henrique Gonzalez Cademartori, Elio José Santini, Clovis Roberto Haselein, Camila Berger, Darci Alberto Gatto, Gianluca Tondi

PDF 1576-1590

The Effect of Thermal Modification of Oak Wood on Waviness Values in the Planar Milling Process, Monitored with a Contact Method Lukáš Kaplan, Miroslav Sedlecký, Monika Sarvašová Kvietková, Adam Sikora

PDF 1591-1604

The Effects of Processing Parameters and AC Foaming Agent on the Mechanical Properties and Morphology of Foamed Wood-Polylactic Acid (PLA) Composites Zhenghao Ge, Zhi Qi, Dange Si, Min Yu

PDF 1605-1618

Physicochemical and Mechanical Properties of Polypropylene-cellulose Nanocrystal Nanocomposites: Effects of Manufacturing Process and Chemical Grafting Jae-Gyoung Gwon, Hye-Jung Cho, Danbee Lee, Don-Ha Choi, Soo Lee, Qinglin Wu, Sun-Young Lee

PDF 1619-1636

Comparative Study of the Characteristics of Green and Brown Coconut Fibers for the Development of Green Composites María Guadalupe Lomelí-Ramírez, Raúl Rodríguez Anda, Kestur G. Satyanarayana, Graciela Ines Bolzon de Muniz, Setsuo Iwakiri

PDF 1637-1660

Modification of the Physical-mechanical Properties of Bamboo-plastic Composites with Bamboo Charcoal after Hydrothermal Aging Qi Chen, Rong Zhang, Daochun Qin, Zexu Feng, Yangao Wang

PDF 1661-1677

Toughening of Wood-plastic Composites Based on Silane/Peroxide Macro Crosslink Poly(propylene) Systems Utai Meekum, Anuchit Khongrit

PDF 1678-1695

Removal of Methylene Blue from Aqueous Solution Using Typha Stems and Leaves Raymundo Sánchez Orozco, Miriam Martínez-Juan, José Juan García-Sánchez, Fernando Ureña-Núñez

PDF 1696-1710

Controlled-Release Fertilizer with Lignin Used to Trap Urea/Hydroxymethylurea/ Urea-Formaldehyde Polymers Gao-Jie Jiao, Qiang Xu, Sheng-Lei Cao, Pai Peng, Diao She

PDF 1711-1728

Molecular Characterization of Trichoderma asperellum and Lignocellulolytic Activity on Barley Straw Treated with Silver Nanoparticles Tarek M. Abdel-Ghany, Magdah Ganash, Marwah M. Bakri, Aisha M. H. Al-Rajhi

PDF 1729-1744

Type, Quantity, and Re-Use of Residues in the Forest Products Industry in Trabzon, Turkey Yener Top, Hakan Adanur, Mehmet Oz

PDF 1745-1760

Relative Machinability of Wood-Based Boards in the Case of Drilling – Experimental Study Piotr Podziewski, Karol Szymanowski, Jarosław Górski, Paweł Czarniak

PDF 1761-1772

Characterization of Biochar Prepared from Cotton Stalks as Efficient Inoculum Carriers for Bacillus subtilis SL-13 Siyuan Tao, Zhansheng Wu, Xiufang He, Bang-Ce Ye, Chun Li

PDF 1773-1786

Tensile Properties of Hybrid Biocomposite Reinforced Epoxy Modified with Carbon Nanotube (CNT) Khairul Izwan Ismail, Mohamed Thariq Haji Hameed Sultan, Ain U. M. Shah, Norkhairunnisa Mazlan, Ahmad Hamdan Ariffin

PDF 1787-1800

Preparation and Properties of Pulp Black Liquor Briquettes Baonong Tian, Zhe Ji, Fushan Chen

PDF 1801-1813

Some Physico-mechanical Characteristics of Uncoated OSB ECO-products Made from Scots Pine (Pinus sylvestris L.) and Bonded with pMDI Resin Mohamed Zidan Mohamed Salem, Martin Böhm, Přemysl Šedivka, Ramadan A. Nasser, Hayssam M. Ali, Wael Abo Elgat

PDF 1814-1828

Improving Impregnation and Penetration Properties of Refractory Woods Through Cryogenic Treatment Huseyin Yorur, Kadir Kayahan

PDF 1829-1842

Improving Bonding Strength of Oven-dried Poplar Veneers Using Atmospheric Cold Plasma Treatment Thi Phuong Nguyen, Weimin Chen, Yizhong Cao, Xiang Wang, Shukai Shi, Minzhi Chen, Xiaoyan Zhou, Quangtrung Nguyen

PDF 1843-1851

Transcriptome Analyses to Reveal Genes Involved in Terpene Biosynthesis in Resin Producing Pine Tree Pinus kesiya var. langbianensis Liukun Wen, Rui Shi, Juan Wang, Youjie Zhao, Huaibi Zhang, Xi Ling, Zhi Xiong

PDF 1852-1871

Energy Recovery Together with Amorphous Nanosilica Production from Rice Straw via Dry Anaerobic Digestion Safoora Mirmohamadsadeghi, Keikhosro Karimi

PDF 1872-1884

Synthesizing Magnetic Support for Laccase Immobilization for the Purification of Pre-hydrolysis Liquor Qiang Wang, Tianzhong Yuan, Shanshan Liu, Xin Fu, Guihua Yang, Jiachuan Chen, Wenhai Li, Rendang Yang, Lucian Lucia

PDF 1885-1894

Characterization of Wood Surface Elemental Compositions after Thermo-vacuum Treatment and Superheated-steam Heat Treatment Yan Yang, Chunlei Dong, Bei Luo, Taian Chen, Jianxiong Lu

PDF 1895-1908

Improving the Efficiency of Biomass Pretreatment and Enzymatic Saccharification Process by Metal Chlorides Dan Huo, Xie Danni, Qiulin Yang, Qiujuan Liu, Qingxi Hou, Zhengyi Tao

PDF 1909-1916

Kinetic Study of Catalytic Cracking of Bio-oil over Silica-alumina Catalyst Sunarno Sunarno, Rochmadi Rochmadi, Panut Mulyono, Muhammad Aziz, Arief Budiman

PDF 1917-1929

How Customers of Small and Medium Wood-processing Slovak Enterprises Perceive a Green Product Denisa Malá, Mariana Sedliačiková, Dana Benčiková

PDF 1930-1950

Dynamic Behaviour of Woven Bio Fiber Composite Murugan Rajesh, Mohamed Thariq Hameed Sultan, Marimuthu Uthayakumar, Kandasamy Jayakrishna, Ain Umaira Md Shah

PDF 1951-1960

Effect of Growth Period and Sampling Section on the Chemical Composition and Microstructure of Raw Hemp Fibers Liu Liu, Bei Li, Yeping Xiang, Ruiyun Zhang, Jianyong Yu, Bin Fang

PDF 1961-1976

Preparation and Characterization of Sol-gel Silica-modified Kenaf Bast Microfiber/Polypropylene Composites Muzafar Zulkifli, Md. Sohrab Hossain, Nor Afifah Khalil, Ahmad Naim Ahmad Yahaya, Fahmi Asyadi Md Yusof, Azanam Shah Hashim

PDF 1977-1992

Behavior of Concrete and Mortar in Response to the Inclusion of Toxic Jatropha Seed Cake Marcelo Santana, Maria Da Consolação Fonseca De Albuquerque, William Deodato Isique, Thiago Pastre Pereira, Aparecido Carlos Gonçalves, Enes Furlani Junior, Carla Neves Costa

PDF 1993-2004

Medium-density Fiberboard (MDF) and Edge-glued Panels (EGP) after Edge Milling - Surface Roughness after Machining with Different Parameters Miroslav Sedlecký, Monika Sarvašová Kvietková, Richard Kminiak

PDF 2005-2021

Mechanical Properties of Fibre-Metal Laminates Made of Natural/Synthetic Fibre Composites Ibrahim Mohammed, Abd Rahim Abu Talib, Mohammed Thariq Hameed Sultan, Mohammad Jawaid, Ahmad Hamdan Ariffin, Syamimi Saadon

PDF 2022-2034

Effect of Hydrophobic Modification on Mechanical Properties of Chinese Fir Wood Rui Yang, Jie Zhang, Siqun Wang, Haiyan Mao, Yilin Shi, Dingguo Zhou

PDF 2035-2048

Review Articles (Peer Reviewed)

Critical Links Governing Performance of Self-binding and Natural Binders for Hot-pressed Reconstituted Lignocellulosic Board without Added Formaldehyde: A Review Martin A. Hubbe, Anthony Pizzi, Haiyang Zhang, Rasmina Halis

PDF 2049-2115

The Multifactorial Aspect of Wood Weathering: A Review Based on a Holistic Approach of wood Degradation Protected by Clear Coating Antoine Cogulet, Pierre Blanchet, Veronic Landry

PDF 2116-2138

The Research Progress of Machining Mechanisms in Milling Wood-based Materials Weihua Wei, Yuantong Li, Tongming Xue, Shiyuan Tao, Changtong Mei, Wandong Zhou, Jian Wang, Tongyue Wang

PDF 2139-2149

Review of Silver Nanoparticles (AgNPs)-Cellulose Antibacterial Composites Yongjian Xu, Shasha Li, Xiaopeng Yue, Wanli Lu

PDF 2150-2170

A Review of Eucalyptus Wood Collapse and its Control during Drying Lin Yang, Honghai Liu

PDF 2171-2181