Vol 16, No 1 (2021)

Table of Contents

Editorials (Opinion Pieces)

Nanocellulose: Beyond the Ordinary
Kojiro Uetani, Takuya Kitaoka
PDF
1-4
Miscanthus: Beyond its Use as an Energy Crop
Mengyao Sa, Bojin Zhang, Shengdong Zhu
PDF
5-8
Industrial Biomaterials Start-ups: Technology Selection
Joel Justin Pawlak
PDF
9-12
Education, Research, and Dishwashers in the Time of COVID-19
John A. Heitmann
PDF
13-15
When Defects Dominate: Rheology of Nanofibrillated Cellulose Suspensions
Martin A. Hubbe
PDF
16-18

Research Articles (Peer Reviewed)

Risk Analysis, Practice, and Considerations in Capital Budgeting: Evidence from the Field for the Bio-based Industry
Camilla Abbati de Assis, Antonio Suarez, Jeffrey P. Prestemon, Jeffrey Stonebraker, Carlos Carrillo, Sudipta Dasmohapatra, Hasan Jameel, Ronalds Gonzalez
PDF
19-45
Influence of Mechanical Surface Preparation Methods on the Bonding of Southern Pine and Spotted Gum: Tensile Shear Strength of Lap Joints
William Leggate, Robert McGavin, Andrew Outhwaite, Chandan Kumar, Adam Faircloth, Mark Knackstedt
PDF
46-61
Changes in Hardwood Sawtimber Growth, Mortality, and Removals in the Eastern United States
William G. Luppold, Mathew S. Bumgardner
PDF
62-76
Effect of Temperature on Composite Films Made with Activated Carbon, Graphite, or Graphene Oxide (GO) in a Gelatin Matrix
Siqiao Yang, Haichao Li
PDF
77-95
Preparation of Shape-Stabilized Phase Change Material by the Valorization of Oil Palm Waste: Reduced Graphene Oxide-activated Carbon Derived Carbon Matrix for Thermal Energy Storage
Salisu Nasir, Mohd Zobir Hussien, Zulkarnain Zainal, Nor Azah Yusof
PDF
96-117
Fractionation of Broom (Cytisus striatus) Biomass Components via Mild Sulfite Pretreatment and Enzymatic Hydrolysis
Tânia P. Gomes, Vera L. D. Costa, Álvaro F. C. Vaz, Rogério M. S. Simões
PDF
118-140
Temperature During the Vibration-assisted Compression of Alfalfa
Xiaoyu Wu, Shuai Yang, Chundong Song, Kun Ding, Chuanzhong Xuan, Yanhua Ma
PDF
141-150
Research on Tool Wear Factors for Milling Wood-plastic Composites Based on Response Surface Methodology
Weihua Wei, Yingli Li, Yuantong Li, Yiqi Xu, Changyong Yang
PDF
151-162
The Effect of Stimulants and Environmental Factors on Resin Yield of Pinus merkusii Tapping
Ganis Lukmandaru, Syaiful Amri, Sigit Sunarta, Tomy Listyanto, Rini Pujiarti, Ragil Widyorini
PDF
163-175
Morphology and Properties of Agarwood-waste-filled Natural Rubber Latex Foam
Narissara Mahathaninwong, Thiensak Chucheep, Seppo Karrila, Wichuta Songmuang, Napat Rodsang, Suphatchakorn Limhengha
PDF
176-189
Furfural Preparation using KHSO4 as the Catalyst and its Recovery and Reuse
Yi-Mei Sun, Jun Wang, Yi-Ming Yu, Jin-hui Wang, Ming-Gong Chen, Ming-Qiang Chen
PDF
190-208
Fabrication of Lignocellulosic Biomass Paper Containing Nanofibrillated Biomass
Samarthya Bhagia, John R. Dunlap, Mohammed Zahid A. Khuraishi, Richard R. Lowden, Wellington Muchero, Uday K. Vaidya, Yunqiao Pu, Arthur J. Ragauskas
PDF
209-222
Preparation of Hydrogen-rich Gas by Catalytic Pyrolysis of Straw-plastic Mixture with Nickel-based Honeycomb Cinder
Zeshan Li, Yiran Zhang, Tao Xiong, Bolin Li, Menghan Xiao, Xianzhou Xu, Rui Hu, Yuan Zhu, Jianfen Li
PDF
223-235
The Durability of Press-formed Paperboard Trays – Effects of Sealing and Drying
Arvo Niini, Ville Leminen, Panu Tanninen, Juha Varis, Teija Laukala
PDF
236-248
Modified Lignin Nanosphere Adsorbent for Lead and Copper Ions
Baoshan Xie, Yi Hou, Youming Li
PDF
249-262
Verification and Further Study on Method of Measuring Contact Force Between Mortise and Tenon Joint
Wei-Lian Fu, Hui-Yuan Guan, Xin-Yi Zhang
PDF
263-276
Preparation and Characterization of Polydimethylsiloxane-based Paper Transparentizing Agent and its Application in Paper Coating
Haoran Ma, Yujie Gao, Longgang Tian
PDF
277-290
Production, Purification, and Characterization of Alkaline Protease from Aspergillus flavus and its Compatibility with Commercial Detergents
Amtul Wadood Wajeeha, Muhammad Javaid Asad, Raja Tahir Mahmood, Tayyaba Zainab, Sidrah Nazir, Jehangir Khan, Muhammad B. Shah, Maqsood Ahmed, Syed L. Shah, Muhammad Ismail, Nasib Zaman, Dawood Ahmed, M. Imran Khan, Muhammad Rizwan
PDF
291-301
The Influence of Mechanical Surface Preparation Method, Adhesive Type, and Curing Temperature on the Bonding of Darwin Stringybark
William Leggate, Robert L. McGavin, Andrew Outhwaite, Jack Dorries, Rhianna Robinson, Chandan Kumar, Adam Faircloth, Mark Knackstedt
PDF
302-323
Preparation of Acicular Mesoporous Char Sulfonic Acid and Its Application for Conversion of Fructose to 5-Hydroxymethylfurfural
Shuang Zhang, Xiaohui Han, Yanjie Liu, Ling Liu, Jiajun Yang, Long Zhang
PDF
324-338
Analysis of Furniture Products’ Contribution to Turkey’s Economy with a Hybrid Multi-criteria Decision Making Method
Nadir Ersen
PDF
339-353
Racking Performance of Poplar Laminated Veneer Lumber Frames and Frame-shear Hybrid Walls
Yan Liu, Zizhen Gao, Hongwei Ma, Meng Gong, Honghe Wang
PDF
354-371
Variations of Moisture Content in Manufacturing CLT-Concrete Composite Slab Using Wet Construction Method
Yo-Jin Song, Seong-Yeob Baek, In-Hwan Lee, Soon-Il Hong
PDF
372-386
Effect of Smoke Treatment on Flexural Strength of Bamboo Hierarchical Structure
Raviduth Ramful, Atsushi Sakuma
PDF
387-402
Science and Technology Courses during the COVID-19 Pandemic: Early Evidences from a Survey of Malaysian Universities
Jegatheswaran Ratnasingam, Natkuncaran Jegathesan, Hazirah Ab Latib, Lee Yan Yi, Manohar Mariapan, Florin Ioras, Amir Affan Abdul Azim
PDF
403-416
Effect of Using Regenerated Combined FAU and MOR Zeolites as Catalysts during the Pyrolysis of Kraft Lignin
Ajoy Kanti Mondal, Chengrong Qin, Arthur Jonas Ragauskas, Yonghao Ni, Fang Huang
PDF
417-440
Preparation of Uniformly Dispersed N-isopropylacryl-amide/Acrylic acid/Nanosilver Composite Hydrogel and its Anti-Mold Properties
Rui Peng, Huilong Yu, Chungui Du, Jingjing Zhang, Ailian Hu, Qi Li, Yating Hua, Hongzhi Liu, Shimin Chu
PDF
441-454
Pretreatment of Pussy Willow and Korean Pine Using Various Ionic Liquids and their Mixtures with Organic Solvents for Enzymatic Saccharification
Song-Yi Han, Chan-Woo Park, Eun-Ah Lee, Ji-Soo Park, Gu-Joong Kwon, Nam-Hun Kim, Seung-Hwan Lee
PDF
455-469
Determining the Adsorption and Desorption Properties of Flavonoids Found in Eucommia ulmoides Oliv. Leaves Using Macroporous Resin and Acetylcholinesterase Inhibitor Screening
Zhihong Wang, Zhigang She, Mijun Peng, Qiuling Yang, Tao Huang
PDF
470-491
Antifungal Potential of Three Natural Oils and Their Effects on the Thermogravimetric and Chromatic Behaviors When Applied to Historical Paper and Various Commercial Paper Sheets
Maisa M. A. Mansour, Mohamed Zidan Mohamed Salem, Rushdya Rabee Ali Hassan, Hayssam M. Ali, Dunia A. Al Farraj, Mohamed S. Elshikh
PDF
492-514
Effect of Technological Parameters on Energetic Efficiency When Planar Milling Heat-treated Oak Wood
Peter Koleda, Štefan Barcík, Michal Korčok, Zuzana Jamberová, Vadzim Chayeuski
PDF
515-528
Improved Flame Retardancy and Thermal Stability of P- and N-containing Diphenol Epoxy Resins from Lignin Oxidation Degraded Derivatives
Liqing Zhu, Jiewang Ye, Weimiao Lu, Yan Zhang, Zhenfu Jin
PDF
529-545
Chemical and Morphological Changes in Fibre Structure due to Material Heating during Ultrasonic-assisted Embossing of Cardboard
Ulrike Käppeler, Jennes Hünniger, André Hofmann, Simon Hamblyn, Andrea Berlich, Lutz Engisch
PDF
546-557
Medium-density Fibreboard Milling Using Selected Technological Parameters
Grzegorz Pinkowski, Waldemar Szymański, Magdalena Piernik, Andrzej Krauss
PDF
558-571
Strength and Dimensional Stability of Cement Bonded Board Reinforced with Tomato Stem Particles and Coconut Husk Dust
Lawrence Olanipekun Aguda, Babatunde Ajayi, Bisola Bakare, Yetunde Aguda, Kayode Olaoye, Abisayo Akala, Olaoluwa Adegoke
PDF
572-582
Shear Behavior of I-shaped Wood-steel Composite Beams
Shixu Wu, Qifeng Shan, Jialiang Zhang, Keting Tong, Yushun Li
PDF
583-596
Film Formation and Foamability of Cellulose Derivatives: Influence of Co-binders and Substrate Properties on Coating Holdout
Johanna Lyytikäinen, Sami-Seppo Ovaska, Isto Heiskanen, Kaj Backfolk
PDF
597-613
Preparation and Characterization of Bio-based Activated Carbon from Fish Scales
Qingsong Ji, Haichao Li, Jingjing Zhang
PDF
614-621
High Yield of Ethanol Production by the Strain Fusarium sp. ZW-21 with Corncob Hydrolysate
Xiaohui Liang, Hongyu Si, Dongliang Hua, Yuxiao Zhao
PDF
622-632
Evaluation of the Compression Strength Performance of Fiber-reinforced Polymer (FRP) and Steel-reinforced Laminated Timber Composed of Small-diameter Timber
In-Hwan Lee, Yo-Jin Song, Soon-Il Hong
PDF
633-642
Reliability of the Measurement Method in Determining the Mass Concentration of Hardwood Dust
Anka Ozana Čavlović, Ivan Bešlić, Željka Zgorelec, Josip Ožegović
PDF
643-654
Effects of Filler Type and Content on the Mechanical, Morphological, and Thermal Properties of Waste Casting Polyamide 6 (W-PA6G)-based Wood Plastic Composites
Belgi̇n Şeker Hirçin, Hüseyin Yörür, Fatih Mengeloğlu
PDF
655-668
Geographical Origin and Log Quality Influence on the Mechanical Properties of Scots Pine Sawnwood
Sławomir Krzosek, Izabela Burawska-Kupniewska, Piotr Mańkowski
PDF
669-683
A New Method to Evaluate the Hand-feel Potential of Furnishes for Tissue Paper Products
Marcel Prinz, Helga Zollner-Croll, Wolfgang Bauer, Frank Meltzer
PDF
684-697
The Effects of Drying Method on the Wood Permeability, Wettability, Treatability, and Gluability of Southern Pine from Australia
William Leggate, Chandan Kumar, Robert L. McGavin, Adam Faircloth, Mark Knackstedt
PDF
698-720
Segmentation of Rays in Wood Microscopy Images Using the U-Net Model
Halime Ergun
PDF
721-728
Effects of Microwave Modification on the Desulfurization and Denitrification of Activated Coke
Junhong Zhang, Zhi-jun He, Qing Guo, De-chao Xiao, Wen-long Zhan
PDF
729-746
Properties of Pinus Modified with Silicon–Titanium Binary Oxides
Xiaoling Liu, Songwu Chen, Yunlin Fu
PDF
747-763
Thermochemical Properties of Energy Crop Species Planted in Slovakia
Andrea Majlingova, Martin Lieskovský, Milan Oravec, Marek Trenčiansky, Rastislav Veľas
PDF
764-778
Investigation of Fungal Decay of Poplar Wood Treated with Pistachio Resin
Maede Ahadnezhad, Soheila Izadyar, Davood Efhamisisi
PDF
779-788
Influence of Active Inorganic Fillers on the Physical and Mechanical Properties of Polyvinyl Chloride Wood-plastic Composites When Immersed
Qiang Jin, Lin Zhu, Jiedeerbieke Madiniyeti, Chunxia He, Li Li
PDF
789-804
The Effect of Hot Water Treatment on the Properties of Lotus Leaves, Reed Leaves, and Basho Leaves Combined with Gelatin Composites
Ke Shi, Zhengqi Wei, Weixing Zhang, Chunxia He
PDF
805-815
Basic Chemical Composition of Pinus spp. Sawdust from Five Regions of Mexico, for Bioenergetic Purposes
Jonathan Sergio Chávez-Rosales, Luis Fernando Pintor-Ibarra, Nicolás González-Ortega, Rocio Orihuela-Equihua, Faustino Ruiz-Aquino, Concepción Luján-Álvarez, José Guadalupe Rutiaga-Quinones
PDF
816-824
Hydrolysis of Ferulic Acids in Corn Fiber by a Metagenomic Feruloyl Esterase
Dominic W. S. Wong, Victor J. Chan, Hans Liao
PDF
825-834
Comparative Wood Anatomy of Atraphaxis taxa in Turkey
Funda Erşen Bak, Derya Cesur
PDF
835-845
Cellulose Fiber Enzymatic Modification to Improve the Softness, Strength, and Absorption Properties of Tissue Papers
Flavia Pinto Morais, Ana M. M. S. Carta, Maria E. Amaral, Joana M. R. Curto
PDF
846-861
Projected Cross-Laminated Timber Demand and Lumber Supply Analysis
Kristin Brandt, Greg Latta, Dane Camenzind, James Daniel Dolan, Donald Bender, Alex Wilson, Michael Wolcott
PDF
862-881
Impact of Heavy Metal Ions on the Simultaneous Saccharification and Fermentation of Formosan Alder Biomass to Form Lactic Acid
Chun-Han Ko, Ko-Yu Liu, Bing-Yuan Yang, Fang-Chih Chang, Po-Heng Lin
PDF
882-892
Effects of Loblolly Pine Extract, Primary and Quaternary Alkyl Ammonium Chlorides Combined with Burgundy Oil from Eastern Red Cedar against Subterranean Termites and Wood-Decay Fungi
Fred J. Eller, Mark E. Mankowski, Grant T. Kirker, Gordon W. Selling
PDF
893-910
Reinforcement Potential of Modified Nanofibrillated Cellulose in Recycled Paper Production
Ayhan Tozluoglu, Hakan Fidan, Ahmet Tutuş, Recai Arslan, Selva Sertkaya, Bayram Poyraz, Sibel Dikmen Küçük, Tamer Sözbir, Bekir Yemşen, Mehmet Onurhan Gücüş
PDF
911-941
Properties of Thermobifida fusca Peroxidase Tfu-1649 and its Combined Synergistic Effects with Xylanase on Lignocellulose Degradation
Wan-Yu Liao, Yu-Chun Huang, Wei-Lin Chen, Cheng-Yu Chen, Chao-Hsun Yang
PDF
942-953
Effects of Vacuum Heat Treatment and Wax Impregnation on the Color of Pterocarpus macrocarpus Kurz.
Lin Yang, Tianqi Han, Yunxia Liu, Qin Yin
PDF
954-963
Effect of Nanofibrillated Cellulose Made from Enzyme-pretreated Bamboo Pulp on Paper Strength
Hae Min Jo, Ji Young Lee, Su Ho Kim, Yeon Hui Lee
PDF
964-978
Effect of Xylanase Pretreatment on the Kraft Pulping of Poplar
Mehmet Akgül, Mehmet Onurhan Gucus, Birol Üner, Celil Atik
PDF
979-986
Properties of Oriented Strand Board from Alkali-washed Bamboo Strands after Steam Treatment
Muhammad Iqbal Maulana, Rio Ardiansyah Murda, Byantara Darsan Purusatama, Rita Kartika Sari, Deded Sarip Nawawi, Siti Nikmatin, Wahyu Hidayat, Seung Hwan Lee, Fauzi Febrianto, Nam Hun Kim
PDF
987-996
Preparation of Biochar via Dry Torrefaction of Wood Meal in a Batch Reactor under Pressure and its Co-Combustion Behavior with Anthracite Coal
Wei Yang, Fan Yang, Xu Zhang, Pengfei Zhu, Huanghu Peng, Zezhou Chen, Lei Che, Shouxin Zhu, Shengji Wu
PDF
997-1008
The Feasibility of Utilizing Existing Process Streams in Kraft Pulp Mills as a Source of Chemicals for Lignin Extraction
Jonas Kihlman, Christer Gustavsson
PDF
1009-1028
Analysis of Cutting Conditions in the Process of Cross-cutting Wood by Circular Saws
Ján Kováč, Pavol Harvánek, Jozef Krilek, Tomáš Kuvik, Ján Melicherčík
PDF
1029-1041
Bacterial Cellulose Production by Acetobacter xylinum CGMCC 1.2378 Using Coconut Shell Acid Hydrolysate as Carbon Source
Yu Liu, Fangfang Wang, Yangyang Sun
PDF
1042-1062
Study on Lignin-free Lignocellulosic Biomass and PSF-PEG Membrane Compatibility
Abiodun Abdulhameed Amusa, Abdul Latif Ahmad, Jimoh K. Adewole
PDF
1063-1075
Influence of Temperature Distribution on Circular Saw Blade Natural Frequencies during Cutting
Miran Merhar
PDF
1076-1090
Manufacturing Tubular Particleboards via Multidimensional-interface Extrusion and Their Physiomechanical Properties
Sijia Sun, Lequn Liu
PDF
1091-1100
Development and Finishing Technology of Waterborne UV Lacquer-Coated Wooden Flooring
Zinan Zhao, Yiting Niu, Fengyi Chen
PDF
1101-1114
Digital Twin Control of Multi-Axis Wood CNC Machining Center Based on LinuxCNC
Aleksandar Rakic, Sasa Zivanovic, Zoran Dimic, Mladen Knezevic
PDF
1115-1130
The Effect of Chipping Method on the Geometry of Particles Produced from Date Palm Frond
Neda Eghtedarnejad, Saeed Kazemi-Najafi, Ali Shalbafan
PDF
1131-1143
Fuel Pellets from Fine Paper Mill Sludge Supplemented by Sawdust and by Refined Recovered Lubricating Oil
Isahq Ahmad, Min-Seok Lee, Ho-Kyung Goo, Chang-Yeong Lee, Jeong-Heon Ryu, Chul-Hwan Kim
PDF
1144-1160
Prediction of the Thermal Conductivities of Wood Based on an Intelligent Algorithm
Shiyu Zhou, Xiaoxia Yang, Yandong Zhang, Xiaoping Liu, Yucheng Zhou
PDF
1161-1185
Research on Packaging Optimization in Customized Panel Furniture Enterprises
Guokun Wang, Jiangang Zhu, Wenwen Cai, Bin Liu, Yubin Tian, Fanyang Meng
PDF
1186-1206
Optimizing the Saccharification of Pretreated Wood Biomass using Crude Enzyme from Acanthophysium Sp. KMF001
Sohyun Park, Jae-Kyung Yang, Young-Kyoon Kim, Jeonghee Yun, Yeong-suk Kim
PDF
1207-1229
Application of Silane-treated Tea Waste Powder as a Potential Filler for Natural Rubber Composites
Nabil Hayeemasae, Hanafi Ismail
PDF
1230-1244
Preparation of Microspheres and Microfiber Membranes from Liquefaction Products of Salix Holocellulose by Electrospinning
Liping Jin, Yanfei Pan, Surigala Surigala, Dingwen Yin, Shuaiqi Hu, Haibiao Yu, Zhaoqi Wang, Jintian Huang
PDF
1245-1255
Preparation of High Water-absorbing Hydrogel Based on Grafted Micro/Nano Cellulose
Suri Gala, Yi Mao, Xiuchun Bao, Bing Ma, Yanfei Pan, Jintian Huang
PDF
1256-1275
Effect of Hot-water Extraction on the Hygroscopicity, Shrinkage, and Swelling of Paulownia tomentosa Wood
Jae-Ik Jo, Seong-Hyun Kim, Do-Hoon Kim, Byantara Darsan Purusatama, Intan Fajar Suri, Go-Un Yang, Jong-Ho Kim, Fauzi Febrianto, Seung-Hwan Lee, Nam-Hun Kim
PDF
1276-1286
Fungicidal Properties of the Medium from SCOBY Microorganism Cultivation in Saturated Wood against Coniophora puteana Fungus
Izabela Betlej, Bogusław Andres, Dominika Szadkowska, Krzysztof Jan Krajewski, Aleksandra Ościłowska
PDF
1287-1295
From Flax Fibers to Activated Carbon Electrodes: The Role of Fiber Refining
Hongwei Li, Yucheng Feng, Lvqiao Tang, Fei Yang
PDF
1296-1310
Flame-Retardancy and Smoke Suppression Characteristics of Bamboo Impregnated with Silicate-Intercalated Calcium Aluminum Hydrotalcates
Yating Hua, Chungui Du, Huilong Yu, Ailian Hu, Rui Peng, Jingjing Zhang, Qi Li, Zhongqing Ma
PDF
1311-1324
Application of Plant Essential Oils in Controlling Wood Mold and Stain Fungi
La Hu, Lizhe Qin, Junkang Xie, Huilan Xu, Zhangqi Yang
PDF
1325-1334
Phosphate Adsorption onto Bagasse Iron Oxide Biochar: Parameter Optimization, Kinetic Analysis, and Study of Mechanisms
Qing Zhang, Yan-mei Ding, Lin Lu, Jing-xi Li, Mei-na Liang, Yi-nian Zhu
PDF
1335-1357
Simultaneous Saccharification and Co-fermentation with a Thermotolerant Saccharomyces cerevisiae to Produce Ethanol from Sugarcane Bagasse under High Temperature Conditions
Wei-Lin Tu, Tien-Yang Ma, Chung-Mao Ou, Gia-Luen Guo, Yu Chao
PDF
1358-1372
Models to Estimate Longitudinal Compressive Strength of Brazilian Hardwood Based on Apparent Density
Francisco Antonio Rocco Lahr, Felipe Nascimento Arroyo, Edson Fernando Castanheira Rodrigues, João Paulo Boff Almeida, Vinicius Borges de Moura Aquino, Anderson Renato Vobornik Wolenski, Herisson Ferreira dos Santos, André Luiz Nonato Ferraz, Eduardo Chahud, Júlio Cesar Molina, Roberto Vasconcelos Pinheiro, André Luis Christoforo
PDF
1373-1381
Application of Aluminum Sulfate in the Treatment of Papermaking White Water
Xianglan Ming, Qichao Li, Wei Jiang
PDF
1382-1393
Simulation of a Maize Ear Picking Device with a Longitudinal Horizontal Roller Based on Hypermesh Modeling
Jianjian Tai, Haitao Li, Yunyi Guan, Ning Ding, Yuefeng Du, Enrong Mao
PDF
1394-1410
Selected Physical and Mechanical Properties of Hemp Seeds
Zdzislaw Kaliniewicz, Krzysztof Jadwisienczak, Zbigniew Żuk, Adam Lipinski
PDF
1411-1423
Modelling Cutting Forces using the Moduli of Elasticity in Oak Peripheral Milling
Bolesław Porankiewicz, Daria Wieczorek, Marija Djurkovic, Ireneusz Idzikowski, Zbigniew Węgrzyne
PDF
1424-1437
Limitations on the Protective Action of MgSO4 for Cellulose during Kraft Pulp Oxygen Delignification
Hai Huang, Yuantao Hu, Hui Zhang, Shilin Cao, Xiaojuan Ma
PDF
1438-1452
Carboxymethylated Pulp as Starting Point to Prepare Hydroxypropylmethyl Cellulose with Enhanced Gel Rheological Properties in an Aqueous Medium
Othman A. Hamed, Rana Al-Kerm, Rola Al-Kerm, Hisham Qrareya, Abdalhadi Deghles, Omar Dagdage
PDF
1453-1468
Characteristics of Small Molecule Compounds Produced from the Co-pyrolysis of Cotton Stalk and Coal
Chuyang Tang, Lei Yang, Xianchun Li, Jinling Song
PDF
1469-1481
Effect of Heat Treatment on Shore-D Hardness of Some Wood Species
Bruno Esteves, Sırrı Şahin, Umit Ayata, Idalina Domingos, José Ferreira, Levent Gürleyen
PDF
1482-1495
An Investigation of Wood Pallets Landfilled and Recovered at US Municipal Solid Waste Facilities
Zachary Shiner, Laszlo Horvath, Philip Araman, Brad Gething
PDF
1496-1522
Microstructure of Thermally Modified Radiata Pine Wood
José Luis Cabezas-Romero, Linette Salvo-Sepúlveda, Helga Contreras-Moraga, Natalia Perez-Pena, Victor Sepúlveda-Villarroel, Maximilian Wentzel, Rubén A. Ananías
PDF
1523-1533
Dissolution of Organic Components of Straw by Ionic Liquid
Hua Chen, Junsheng Song, Xufeng Qiu, Qizhong Wo, Huabo Yao, Bingbing Zheng, Liuhao Jiang, Jun Sun, Hong Zhang, Hui Pei, Jinmei Sun
PDF
1534-1547
Caulerpa sertularioides Extract as a Complexing Agent in the Synthesis of ZnO and Zn(OH)2 Nanoparticles and its Effect in the Azo Dye’s Photocatalysis in Water
Daniel Garcia-Bedoya, Luis Patricio Ramírez-Rodríguez, Jesús Manuel Quiroz-Castillo, Edgard Esquer-Miranda, Arnulfo Castellanos-Moreno
PDF
1548-1560
Resin-impregnated Wooden Anti-glare Board and Its Outstanding Exterior Performance
Wanjia Yang, Jian Liu, Wei Zhang, Derong Zhang, Jianzhang Li, Shifeng Zhang, Yanming Han
PDF
1561-1580
Effects of Thermo-Vibro-Mechanic® Densification on the Density and Swelling of Pre-Treated Uludağ Fir and Black Poplar Wood
Mehmet Budakçı, Süleyman Şenol, Mustafa Korkmaz
PDF
1581-1599
Augmenting Versatile Peroxidase Production from Lentinus squarrosulus and its Role in Enhancing Ruminant Feed
Aarthi Ravichandran, Ramya G. Rao, Shanubhoganahalli Maheswarappa Gopinath, Manpal Sridhar
PDF
1600-1615
Effects of Artificial Weathering on the Color, Gloss, Adhesion, and Pendulum Hardness of UV System Parquet Varnish Applied to Doussie (Afzelia africana) Wood
Levent Gurleyen
PDF
1616-1627
Preparation of Anisole in Phenol by Zn/HZSM-5 Catalyst from Walnut Shell Catalyzed Liquefaction
Jianxiang Liu, Yuhan Lu, Ruiling Wang, Yuanbo Huang, Can Liu, Zhifeng Zheng
PDF
1628-1641
Optimization of the Effect of Accelerated Weathering Conditions on Wood Surfaces via the Taguchi Method
Rıfat Kurt, Ahmet Can
PDF
1642-1653
Manufacturing of a Sandwich Structure Engineered Wood with a Rice Husk Flake Core and Teak Veneer Reinforced with Glass/Carbon Fiber Skin
Utai Meekum, Waree Wangkheeree
PDF
1654-1673
Drying Performance, as well as Physical and Flexural Properties of Oil Palm Wood Dried via the Super-Fast Drying Method
Mohd Rafsan Rais, Edi Suhaimi Bakar, Zaidon Ahaari, Seng Hua Lee, Mojtaba Soltani, Farid Ramli, Paiman Bawon
PDF
1674-1685
Brewing Process Development by Integration of Edible Filamentous Fungi to Upgrade the Quality of Brewer’s Spent Grain (BSG)
Mohsen Parchami, Jorge A. Ferreira, Mohammad J. Taherzadeh
PDF
1686-1701
Optimization of Hot-press Parameters for Plywood with Environmental Aluminophosphate Adhesive
Qihua Wei, Zhenzeng Wu, Wei Wei, John Tosin Aladejana, Kouomo Guelifack Yves, Dehong Li, Xinjun Hou, Xiaodong (Alice) Wang, Yongqun Xie
PDF
1702-1712
Preparation of Cellulose Nanocrystals via Successive Periodate and Bisulfite Oxidation and Mechanical and Hydrophilic Properties of the Films
Baoyu Wang, Rong Li, Jinhao Zeng, Min He, Junrong Li
PDF
1713-1725
Controlled Release of Essential Oil from a Rubberwood Box Using Activated Carbon to Extend the Shelf Life of Strawberries and its Possible Mode of Action
Saifon Phothisuwan, Nirundorn Matan, Narumol Matan
PDF
1726-1739
Experimental Study on Molding Technology for a Mixture of Corn Straw and Cow Manure
Ruili Wang, Jin Yu, Tiejun Wang, Tieliang Wang, Xiang Li
PDF
1740-1756
Influence of Knife Geometry on Selected Factors Pertaining to the Delimbing Process
Ján Melicherčík, Jozef Krilek, Ján Kováč, Pavol Harvánek
PDF
1757-1771
The Effect of Different Mineral Fillers on Starch/Rice Husk Composite Properties
Yashar Einollahi, Amir Hooman Hemmasi, Habibollah Khademi Eslam, Esmaeil Ghasemi, Mohammad Talaeipour
PDF
1772-1786
Effect of Ozone Treatment on Softwood Soda Lignin-based Water Reducer Performance for Concrete
Shiho Takahashi, Yasumitsu Uraki, Tatsuhiko Yamada
PDF
1787-1797
Dissolution of Condensed Tannin Powder-based Polyphenolic Compound in Water-Glycerol-Acid Solution
Nuruldiyanah Kamarudin, Dayang Radiah Awang Biak, Zurina Zainal Abidin, Francisco Cardona, S. M. Sapuan
PDF
1798-1815
Ionic Solution Pretreatment of Oil Palm Empty Fruit Bunch to Produce Sugars
Nursia Hassan, Tan Li Wen, Nur Amirah Khairina Khairil Anwar, Ani Idris
PDF
1816-1824
Ultrasound-assisted Extraction of Bayberry Tannin and Optimization Using Response Surface Methodology
Mengqi Dong, Yufan Hu, Huijun Zhang, Xinyuan Lan, Xiaolu Ran, Yijia Li, Lu Gan, Shuguang Han
PDF
1825-1841
Elastic Moduli of Butt-end Logs and the Variable Knots Distribution in Scots Pine from Western Poland
Radosław Mirski, Marek Wieruszewski, Adrian Trociński, Jakub Kawalerczyk, Karol Łabęda
PDF
1842-1853
Value-added Utilization of Caustic Soda Lye from Cold Caustic Extraction Process in the Pulp Mill
Chen Gong, Jian-Ping Ni, Shu-Jie Fan, Yu Zhang, Bin Yang, Zhen-Hua Su, Chao Tian
PDF
1854-1862
Effect of Vibration Frequency on the Vibration-assisted Densification for Alfalfa
Haoyi Wang, Pei Wu, Dongmei Xue, Yanhua Ma
PDF
1863-1874
Performance Properties of Particleboard Panels Modified with Nanocellulose/Boric Acid
Mert Yildirim, Zeki Candan
PDF
1875-1890
Sawn Timber and Rotary Veneer Processing and Grade Recovery Investigation of Northern Australian Plantation Grown African Mahogany
Robert L. McGavin, John McGrath, Chris Fitzgerald, Chandan Kumar, Chris Oliver, Alex Lindsay
PDF
1891-1913
Parameter Optimization via the Taguchi Method to Improve the Mechanical Properties of Bamboo Particle Reinforced Polylactic Acid Composites
Mohammad Rawi Nurul Fazita, Nurnadia Johary, H. P. S. Abdul Khalil, Najieha Norazli, A. A. Azniwati, M. K. Mohamad Haafiz
PDF
1914-1939
Reduction in Lignin Peroxidase Activity Revealed by Effects of Lignin Content in Urea Crosslinked Starch under Aerobic Biodegradation in Soil
Zahid Majeed, Zainab Ajab, Qingjie Guan, Abdul Zahir Abbasi, Qaisar Mahmood, Mater H. Mahnashi, Bandar A. A. Alyami, Ali O. Alqarni, Yahya S. Alqahtani, Nurlidia Mansor
PDF
1940-1948
Riboflavin Enhanced Denitrification of Artificial Wastewater under Low C/N Condition in Cold Season
Jingya Liu, Jingang Huang, Binfang Shi, Kangyin Guo, Jianping Li, Junhong Tang
PDF
1949-1957
Pyrolytic Characteristics and Kinetics of Guanzhong Wheat Straw and its Components for High-value Products
Bingtao Hu, Zhaolin Gu, Junwei Su, Zhijian Li
PDF
1958-1979
Effect of Fenton Pretreatment on Enzymatic Hydrolysis of Poplar
Shujie Wang, Jin Sun, Mengjie Chen, Xianfeng Hou, Zhenzhong Gao
PDF
1980-1987

Review Articles (Peer Reviewed)

Cocoa Pod Husks as Potential Sources of Renewable High-Value-Added Products: A Review of Current Valorizations and Future Prospects
Leygnima Yaya Ouattara, Esaie Kouadio Appiah Kouassi, Doudjo Soro, Yaya Soro, Kouassi Benjamin Yao, Kopoin Adouby, Allali Patrick Drogui, Dayal Rajeshwar Tyagi, Pepin Martin Aina
PDF
1988-2020
Formulating Bioplastic Composites for Biodegradability, Recycling, and Performance: A Review
Martin A. Hubbe, Nathalie Lavoine, Lucian A. Lucia, Chang Dou
PDF
2021-2083
A Perspective of Lignin Processing and Utilization Technologies for Composites and Plastics with Emphasis on Technical and Market Trends
Marcel Kropat, Mochen Liao, Hyeonji Park, Khandoker Samaher Salem, Shelly Johnson, Dimitris S. Argyropoulos
PDF
2084-2115
Cellulose Nanocrystal-based Liquid Crystal Structures and the Unique Optical Characteristics of Cellulose Nanocrystal Films
Xiaoyao Wei, Tao Lin, Min Duan, Hengli Du, Xuefeng Yin
PDF
2116-2137
Hydrophobic Copolymers Added with Starch at the Size Press of a Paper Machine: A Review of Findings and Likely Mechanisms
Ahsen E. Bildik Dal, Martin A. Hubbe
PDF
2138-2180