Flexural Properties of Wooden Nail Friction Welding of Laminated Timber

Abstract

The properties of single shear specimens connected by wooden nail frictional welding and twist nails were studied. The single shear properties of the specimens connected by wooden nail welding were lower than that of the twist nail specimens. The single shear capacity of the wooden nail welding specimen was determined by calculating the method of design value of the bearing capacity of the pin connection. Furthermore, the flexural properties of the wooden nail welding laminated timber were analyzed. Due to the larger diameter of the wooden nails compared with the twist nails, the wooden nail welding laminated timber in the elastic phase had higher stiffness. The elastic modulus of the wooden nail welding laminated timber exceeded the average elastic modulus of the constituent lumber pieces by 9.46%. The number of wood lumbers in wooden nail welding laminated timber had little effect on the elastic modulus of laminated timber, but the nail spacing had a certain effect. Therefore, in future research, it is recommended to use the construction method of twist nail connection to design the wooden nail welding laminated timber. In addition, the nail spacing should refer to the GB 50005 (2003) standard and the wood structure design manual.