Frictional Properties of Red Pine Cones Harvested under Different Conditions

Abstract

The climbing of trees to pick pinecones is a high-risk exercise. In this study, a mechanical gripper jaw was designed. Frictional characteristics between the pinecones and the mechanical gripper jaw during pinecone picking under different conditions were investigated using a workbench simulation, homemade inclined friction meter, and mass tester. Three-level orthogonal and one-factor tests were conducted. The relationship between the water content and friction properties and between the water content and hardness were investigated, and conclusions were drawn on how water content affected friction properties by influencing hardness. The results showed that the contact material greatly affected the friction properties. The pinecone water content was maintained between 24% and 28% to ensure that the coefficient of friction was maximized and that the pinecones were sufficiently hard to dislodge. Additionally, a prototype machine was used to perform pinecone-gripping experiments to validate the experimental and simulation results. Consequently, the results of this study provide a useful reference for the structural design of pinecone picking robots and the picking reason.