Authors
-
Xin Jia
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, China; College of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430205, China
-
Guijiang Tang
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, China; College of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430205, China
-
Jinming Gao
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, China; College of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430205, China
-
Yangmiao Liao
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, China; College of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430205, China
-
Yu Zhang
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, China; College of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430205, China
-
Xueliang Jiang
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, China; College of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430205, China
-
Huan Yang
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, China; College of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430205, China
-
Dan Wu
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, China; College of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430205, China
-
Feng You
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, China; College of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430205, China
-
Peng Yu
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, China; College of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430205, China
-
Chu Yao
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, China; College of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430205, China
Keywords:
Cellulose, Aerogel, Compressive properties, Hydrophobic modification, Sound absorption, Polyethyleneimine
Abstract
A hydrophobic and ultralight cellulose aerogel (CA) was reinforced by polyethyleneimine (PEI) and functionalized by methyltrimethoxysilane (MTMS). Adding PEI improved the mechanical strength and the elastic resilience of the resulting material due to the flexibility enhancement of the cellulose chains, which prevented the collapse of the pore structure and contributed to the uniform pore size distribution. The hydrophobic property of the aerogels with the functionalization of MTMS was improved, which can prevent the pore structure from collapsing due to the absorption of water. The maximum compression modulus of aerogel reached 1.1 MPa at the strain of 80%, and its hydrophobic water contact angle was up to 112°. The hydrophobic composite aerogels exhibited ultrahigh efficiency in sound absorption across a wide frequency range from 500 to 6300 Hz, and their average absorption coefficient was greater than 0.74. The light weight, high porosity, and environmentally friendly aerogels presented in this work are promising for efficient sound absorption. They have potential applications in noise pollution treatment.
