Noise as a Physical Risk Factor in Furniture Industry Machines

Abstract

This study aimed to determine the risk level of noise, which is an important physical risk, in small and medium-sized furniture industry enterprises. The noise levels of the circular sawing machines, edge banding machines, and mitre cutting machines, which are among the main processing machines of the sector, were measured. The study was carried out in 32 furniture businesses. The possible risks of noise on the operators of the machines in question and other employees were evaluated. Noise level measurements were made with the help of TESTO 815 measuring device. Dunnett’s T3 test was used to detect differences in noise levels for machine operators and other employees. It was determined that the edge banding machine does not pose an occupational health and safety risk in terms of noise risk factors. However, the mitre cutting machine and the circular sawing machine pose a risk for the machine operator in active production by creating noise above the established exposure limit value. The mitre cutting machine carries the same risk for the machine operator when it is in operation but in passive production. The results revealed the need for personal protective equipment for machine operators for mitre cutting and circular sawing machine.