Evaluating Paper’s Optical Properties after Separate and Combined Use of Nanofibrillated Cellulose with Cationic Starch and Cationic Polyacrylamide

Authors

  • Jafar Ebrahimpour Kasmani Department of Wood and Paper Science and Technology, Savadkooh Branch, Islamic Azad University, Savadkooh, Iran
  • Ahmad Samariha Department of Wood Industry, Technical and Vocational University (TVU), Tehran, Iran
  • Mohammadreza Amiri Margavi Islamic Azad University of Science and Research Branch in Tehran

Keywords:

Cellulose nanofibers, Cationic starch, Cationic polyacrylamide, White liner, Packaging paper

Abstract

Nanofibrillated cellulose (NFC) and its combined usage with cationic starch and a cationic copolymer of acrylamide were studied in relation to the properties of paper. Independent pulp treatments using additives separately included 0%, 5%, 10%, and 15% refined long fiber pulp, 3 and 6% NFC, 0.75 and 1.5% cationic starch and 0.07% and 0.15% cationic polyacrylamide and combined treatments. Handsheets were made of the above treatments, and finally their optical and microscopic properties were evaluated. Increasing the NFC content to 6% increased the brightness and yellowness of the white liner by 13% and 21%, respectively. The liner opacity was also reduced by 1%. Additionally, increasing NFC by 6% compared to imported long fibers, the brightness and yellowness of the white liner increased 5.44% and 6.3%, respectively. The liner opacity was also reduced by 1%. A 1.5% cationic starch addition to NFC increased the brightness of the white liner by 4.4%, its whiteness increased 1.5%, and its yellowness increased 2.1%. The opacity of the liner was also reduced by 7.1%. The use of NFC and cationic starch can improve the optical properties of the white liner, while imported long fibers may be problematic.

Downloads

Published

2024-04-12

Issue

Section

Research Article or Brief Communication