Analysis of the Treatability, Water Repellency Efficiency, and Dimensional Stability of Maritime Pine after Microwave Drying

Authors

  • Fernando J. R. Mascarenhas University of Coimbra, ISISE, ARISE, Department of Civil Engineering (DEC), Rua Luís Reis Santos—Pólo II, University of Coimbra (UC), Coimbra, 3030-788, Portugal; Innovation and Competence Forest Centre (SerQ), Rua J, Nº 9, Zona Industrial da Sertã, Sertã, 6100-711, Portugal
  • Alfredo M. P. G. Dias University of Coimbra, ISISE, ARISE, Department of Civil Engineering (DEC), Rua Luís Reis Santos—Pólo II, University of Coimbra (UC), Coimbra, 3030-788, Portugal; Innovation and Competence Forest Centre (SerQ), Rua J, Nº 9, Zona Industrial da Sertã, Sertã, 6100-711, Portugal
  • André L. Christoforo Federal University of São Carlos (UFSCar), Department of Civil Engineering (DECiv), Postgraduate Program in Civil Engineering (PPGECiv), Rodovia Washington Luís (SP-11 310), Km 235, São Carlos, 13565-905, Brazil
  • Rogério M. S. Simões University Beira Interior (UBI), Department of Chemistry, Unit of Fiber Materials and Environmental Technologies (FibEnTech), Covilhã, Portugal
  • André E. P. Cunha University Beira Interior (UBI), Department of Chemistry, Unit of Fiber Materials and Environmental Technologies (FibEnTech), Covilhã, Portugal
  • Lucas C. P. Carneiro Innovation and Competence Forest Centre (SerQ), Rua J, Nº 9, Zona Industrial da Sertã, Sertã, 6100-711, Portugal
  • André M. A. Dias Innovation and Competence Forest Centre (SerQ), Rua J, Nº 9, Zona Industrial da Sertã, Sertã, 6100-711, Portugal

Keywords:

Microwave drying, Maritime pine, Impregnability, Water repellence efficiency, Anti-swelling efficiency

Abstract

The impregnability of Portuguese maritime pine (Pinus pinaster Ait.) subjected to microwave (MW) drying was tested, and the hydrophobicity, anti-swelling efficiency (ASE), and water repellence efficiency (WRE) were evaluated. Small wood heartwood samples of Portuguese maritime pine and two distinct MW treatment settings were employed. The levels of ASE and WRE of the wood elements were evaluated throughout four cycles of drying in an oven and soaking in water. Because of MW applied energy, the wood pine samples were satisfactorily impregnated with the preservative product. Regarding the absolutely dry densities of the samples, very subtle reductions were measured, and they were statistically equivalent to the average density of the non-MW-treated group. Slight improvements were identified in the WRE values of wood samples dried in the microwave. In terms of ASE, both MW-treated groups had a statistically significant increase. The MW treatment decreased the volumetric swelling of the maritime pine wood specimens. Hence, this study raises new insights and previously unexplored paths that can contribute to the expansion and greater application of MW technology in maritime pine and other species.

Downloads

Published

2024-05-10

Issue

Section

Research Article or Brief Communication