Analytical Method with Iteration Technique (AMIT) and Finite Element Method (FEM) for Predicting the Flexural Performance of Glulam Wood/PVC Composite Hollow Member

Abstract

The flexural performance of a glulam wood/PVC composite (GWPVC) hollow member, which was assembled from four elements with WPVC composite hollow sections to create a double I-section, was studied using two methods: the analytical method with iteration technique (AMIT) and the finite element method (FEM). Experiments verified the predictions from AMIT and simulations from FEM to determine the most suitable method for the parametric studies. This investigation explored the variations in slenderness ratio and the flange and web thickness to enhance and study their impact on flexural performance. In parametric studies, equal cross-sectional areas were used to facilitate comparisons and maintain production costs. The importance of bond strength at the contact surfaces in assembling a GWPVC hollow member led to bonding tests and confirmed sufficient strength at contact surfaces. In four-point bending tests, the GWPVC hollow member exhibited a brittle mode with flexural tensile failure without delamination. The initial MOE, MOR, and maximum deflection values were 5,140 MPa, 29.8 MPa, and 47.8 mm, respectively. The parametric study employs AMIT to investigate flexural performance and reveals that varying the slenderness ratio affected the initial stiffness, maximum deflection, and ultimate load. Flexural performance can be improved by making minor adjustments.